2026 Cadillac Escalade IQL Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Cadillac Escalade IQL is 6x132. It has a center bore of 66.9 mm, an offset range of 50, and utilizes 14x1.5 (Cone seat, 22mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2026 Cadillac Escalade IQL Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x132 |
|---|---|
| Center Bore (Hub Bore) | 66.9 mm |
| Offset Range (ET) | 50 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
2026 Escalade IQL — Year-Specific Fitment Context
The 2026 is the only model year of the Cadillac Escalade IQL in our database using the 6x132 bolt pattern.
2026 Cadillac Escalade IQL Wheel Interchange & Donor Fitment Guide (6x132)
The 6x132 bolt pattern is shared by 52 vehicles in our database (uncommon). For safe wheel swaps on the 2026 Cadillac Escalade IQL, donor rims must match the 6x132 PCD and have a center bore of at least 66.9 mm:
DIRECT HUB MATCH Same 6x132 Pattern & Exact 66.9mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Cadillac OPTIQ | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2026 Cadillac Vistiq | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2025 Cadillac Celestiq | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2025 Cadillac Escalade IQ | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2023 Cadillac LYRIQ | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
HUB RING FITMENT Same 6x132 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2010 GMC Acadia | 74.6 mm | 74.6mm → 66.9mm |
50 |
| 2007 Saturn Outlook | 74.6 mm | 74.6mm → 66.9mm |
50 |
| 2005 Saturn Relay | 74.5 mm | 74.5mm → 66.9mm |
35-50mm |
| 2008 Buick Enclave | 74.5 mm | 74.5mm → 66.9mm |
50 |
| 2017 Cadillac XT5 | 74.5 mm | 74.5mm → 66.9mm |
42 |
| 2009 Chevrolet Traverse | 74.5 mm | 74.5mm → 66.9mm |
42 |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Cadillac Escalade IQL — Frequently Asked Questions
What is the bolt pattern for a 2026 Cadillac Escalade IQL?
The 2026 Cadillac Escalade IQL uses a 6x132 bolt pattern (also called lug pattern or PCD). The center bore is 66.9mm and the offset is 50mm.
How do I measure the bolt pattern on my 2026 Cadillac?
The 2026 Escalade IQL uses a 6x132 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2026 Cadillac Escalade IQL?
Yes, but ensure the wheel spacers match the 6x132 bolt pattern and 66.9mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What lug nut size does the 2026 Cadillac Escalade IQL use?
The 2026 Cadillac Escalade IQL uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2026 Cadillac Escalade IQL?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 66.9mm center bore important for the 2026 Escalade IQL?
The 66.9mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →