2008 Chevrolet Malibu (Classic) Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Chevrolet Malibu (Classic), along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x110 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 Malibu (Classic) — Year-Specific Fitment Context
The 2008 is the only model year of the Chevrolet Malibu (Classic) in our database using the 5x110 bolt pattern.
Fitment Notes
The 2008 Chevrolet Malibu (Classic) has a bolt pattern of 5x110.
This means it is a 5 lug pattern with a circle diameter of 110mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Chevrolet Malibu (Classic) appears from 2008 to 2008 (1 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x110 Pattern Context
This bolt pattern appears on 126 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x110:
2008 Chevrolet Malibu (Classic) — Frequently Asked Questions
What is the bolt pattern for a 2008 Chevrolet Malibu (Classic)?
The 2008 Chevrolet Malibu (Classic) uses a 5x110 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 40mm.
Do 2008 Chevrolet Malibu (Classic)s use lug bolts or lug nuts?
The 2008 Malibu (Classic) requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2008 Chevrolet?
The 2008 Malibu (Classic) uses a 5x110 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 65.1mm center bore important for the 2008 Malibu (Classic)?
The 65.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2008 Chevrolet Malibu (Classic)?
The factory center bore (hub bore) for the 2008 Chevrolet Malibu (Classic) is 65.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2008 Chevrolet Malibu (Classic)?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Chevrolet Malibu (Classic) is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2008-2008 (1 model years).
- Observed bolt-pattern variants: 1 (5x110).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2008 Chevrolet Malibu (Classic), please report it via our About page contact so we can verify and update this record.