2024 Chevrolet Traverse Limited Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Chevrolet Traverse Limited, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.9 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2024 Traverse Limited — Year-Specific Fitment Context
The 2024 is the only model year of the Chevrolet Traverse Limited in our database using the 6x120 bolt pattern.
6x120 Pattern Context
This bolt pattern appears on 76 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x120:
Expert Buying Guide for 2024 Chevrolet Traverse Limited
The 2024 Chevrolet Traverse Limited uses a 6x120 bolt pattern with a 66.9mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. The factory offset is 50mm; deviations beyond ±5mm may cause clearance issues with suspension or brake components. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—factory wheels use a cone seat, so aftermarket wheels must match. Improper lug nut seating can lead to wheel detachment. Verify that aftermarket wheels have sufficient brake caliper clearance, especially with larger rotors. Re-torque lug nuts after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Chevrolet Traverse Limited appears from 2024 to 2024 (1 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lb after 50 miles of driving.
- ✅ Ensure aftermarket wheels have a center bore of at least 66.9mm; use hub-centric rings if larger.
- ✅ Check for brake caliper clearance; the Traverse Limited may have larger brakes than standard models.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Chevrolet Traverse Limited — Frequently Asked Questions
What is the bolt pattern for a 2024 Chevrolet Traverse Limited?
The 2024 Chevrolet Traverse Limited uses a 6x120 bolt pattern (also called lug pattern or PCD). The center bore is 66.9mm and the offset is 50mm.
Can I put aftermarket wheels on my 2024 Chevrolet Traverse Limited?
Absolutely. Just ensure the aftermarket wheels have a 6x120 bolt pattern, an offset near 50mm, and a center bore of at least 66.9mm (using hub rings if larger).
What is the PCD for a 2024 Chevrolet Traverse Limited?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Traverse Limited, the PCD is 6x120.
How tight should I torque the lug nuts on a 2024 Chevrolet Traverse Limited?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2024 Chevrolet Traverse Limited?
Yes, but ensure the wheel spacers match the 6x120 bolt pattern and 66.9mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What does 50mm offset mean for the 2024 Traverse Limited?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chevrolet.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset