2024 Freightliner MT 45 HEV Chassis Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Freightliner MT 45 HEV Chassis is 10x285.75. It has a center bore of 220 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).

2024 Freightliner MT 45 HEV Chassis Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 10x285.75
Center Bore (Hub Bore) 220 mm
Offset Range (ET) Not Applicable
Thread Size (Lug Nut / Bolt) 22x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 33mm
Wheel Torque Specs 450-500 ft-lbs (610-678 Nm)
🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2024 MT 45 HEV Chassis — Year-Specific Fitment Context

The 2024 is the only model year of the Freightliner MT 45 HEV Chassis in our database using the 10x285.75 bolt pattern.

2024 Freightliner MT 45 HEV Chassis Wheel Interchange & Donor Fitment Guide (10x285.75)

The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2024 Freightliner MT 45 HEV Chassis, donor rims must match the 10x285.75 PCD and have a center bore of at least 220 mm:

DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2026 Freightliner S2LG 106 220 mm (Exact) Not Applicable M22x1.5 (Flat)
2024 Freightliner S2RV 106 Conventional cab & Chassis 220 mm (Exact) Not Applicable 22x1.5 (Flat)
2024 Freightliner SD122 220.1 mm (Exact) Not Applicable 22x1.5 (Cone)
2024 Freightliner VCL Chassis 220.1 mm (Exact) Not Applicable 22x1.5 (Cone)
2024 Freightliner XB Chassis 220 mm (Exact) Not Applicable 22x1.5 (Cone)
2024 Freightliner XB Straight Rail Rear Engine Motor Home Chassis 220.1 mm (Exact) Not Applicable 22x1.5 (Flat)

HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2024 Volvo VAH 221 mm 221mm → 220mm Not Applicable
2024 Volvo VHD 222 mm 222mm → 220mm Not Applicable
2024 Chevrolet 6500XD 222 mm 222mm → 220mm Not Applicable
2024 Freightliner EF Front Engine Bus Chassis 221.1 mm 221.1mm → 220mm Not Applicable
2024 Freightliner EFX Front Engine Bus Chassis 222 mm 222mm → 220mm Not Applicable
2024 Freightliner MD109 222 mm 222mm → 220mm Not Applicable
Looking for all models? View the complete directory of vehicles with 10x285.75 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2024 Freightliner MT 45 HEV Chassis — Frequently Asked Questions

What is the bolt pattern for a 2024 Freightliner MT 45 HEV Chassis?

The 2024 Freightliner MT 45 HEV Chassis uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220mm and the offset is Not Applicablemm.

What does Not Applicablemm offset mean for the 2024 MT 45 HEV Chassis?

An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Freightliner.

Will wheels from another Freightliner fit my 2024 MT 45 HEV Chassis?

Only if they share the exact same 10x285.75 bolt pattern, a compatible offset, and a center bore equal to or larger than 220mm.

How do I measure the bolt pattern on my 2024 Freightliner?

The 2024 MT 45 HEV Chassis uses a 10x285.75 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

What is the factory wheel offset for a 2024 Freightliner MT 45 HEV Chassis?

The OEM offset for the 2024 MT 45 HEV Chassis is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

How tight should I torque the lug nuts on a 2024 Freightliner MT 45 HEV Chassis?

Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Other Freightliner Models

B2 Bus Chassis CST120 Condor FLD112 HDX Rear Engine Bus Chassis MC Front Engine Motor Home Chassis MT 35 Chassis MT 45 HEV Chassis MT-55 HHV Chassis (Hydraulic Hybrid Vehicle) MT45 Chassis RA Cascadia S2 106 Bus Chassis SD122 Sport Chassis Sprinter 2500 Passenger Sprinter WORKER Cargo XB Chassis XB Straight Rail Rear Engine Motor Home Chassis XBP Rear Engine Commercial Bus Chassis XC Formed Rail Rear Engine Motor Home Chassis

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)