2024 Freightliner MT 45G Front Gasoline Engine Walk in Van Chassis Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Freightliner MT 45G Front Gasoline Engine Walk in Van Chassis is 10x225. It has a center bore of 161 mm, an offset range of Not Applicable, and utilizes M22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2024 Freightliner MT 45G Front Gasoline Engine Walk in Van Chassis Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x225 |
|---|---|
| Center Bore (Hub Bore) | 161 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | M22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2024 MT 45G Front Gasoline Engine Walk in Van Chassis — Year-Specific Fitment Context
The 2024 is the only model year of the Freightliner MT 45G Front Gasoline Engine Walk in Van Chassis in our database using the 10x225 bolt pattern.
2024 Freightliner MT 45G Front Gasoline Engine Walk in Van Chassis Wheel Interchange & Donor Fitment Guide (10x225)
The 10x225 bolt pattern is shared by 18 vehicles in our database (uncommon). For safe wheel swaps on the 2024 Freightliner MT 45G Front Gasoline Engine Walk in Van Chassis, donor rims must match the 10x225 PCD and have a center bore of at least 161 mm:
DIRECT HUB MATCH Same 10x225 Pattern & Exact 161mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Isuzu FTR | 161 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
HUB RING FITMENT Same 10x225 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Chevrolet 5500HD | 170.2 mm | 170.2mm → 161mm |
Not Applicable |
| 2025 Chevrolet 5500HG | 170.2 mm | 170.2mm → 161mm |
Not Applicable |
| 2025 Ford F-650 | 170 mm | 170mm → 161mm |
Not Applicable |
| 2025 Ford F-750 | 170 mm | 170mm → 161mm |
Not Applicable |
| 2024 Ford F450 Super Duty Regular Cab | 170.1 mm | 170.1mm → 161mm |
0 |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Freightliner MT 45G Front Gasoline Engine Walk in Van Chassis — Frequently Asked Questions
What is the bolt pattern for a 2024 Freightliner MT 45G Front Gasoline Engine Walk in Van Chassis?
The 2024 Freightliner MT 45G Front Gasoline Engine Walk in Van Chassis uses a 10x225 bolt pattern (also called lug pattern or PCD). The center bore is 161mm and the offset is Not Applicablemm.
What lug nut size does the 2024 Freightliner MT 45G Front Gasoline Engine Walk in Van Chassis use?
The 2024 Freightliner MT 45G Front Gasoline Engine Walk in Van Chassis uses M22x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2024 Freightliner?
The 2024 MT 45G Front Gasoline Engine Walk in Van Chassis uses a 10x225 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does Not Applicablemm offset mean for the 2024 MT 45G Front Gasoline Engine Walk in Van Chassis?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Freightliner.
Will wheels from another Freightliner fit my 2024 MT 45G Front Gasoline Engine Walk in Van Chassis?
Only if they share the exact same 10x225 bolt pattern, a compatible offset, and a center bore equal to or larger than 161mm.
What is the factory wheel offset for a 2024 Freightliner MT 45G Front Gasoline Engine Walk in Van Chassis?
The OEM offset for the 2024 MT 45G Front Gasoline Engine Walk in Van Chassis is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →