2024 Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle) Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle) is 10x285.75. It has a center bore of 220 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Cone seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2024 Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle) Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Center Bore (Hub Bore) | 220 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2024 MT-55 HHV Chassis (Hydraulic Hybrid Vehicle) — Year-Specific Fitment Context
The 2024 is the only model year of the Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle) in our database using the 10x285.75 bolt pattern.
2024 Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle) Wheel Interchange & Donor Fitment Guide (10x285.75)
The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2024 Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle), donor rims must match the 10x285.75 PCD and have a center bore of at least 220 mm:
DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Freightliner MBO Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner MC 45 Chassis | 220 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
| 2024 Freightliner MC Front Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner MC HEV Front Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner MCG Front Gasoline Engine Motor Home Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner MCL Front Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Freightliner MD109 | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Freightliner NGE (956) Platform Truck COE | 221 mm | 221mm → 220mm |
Not Applicable |
| 2024 Freightliner S2 106 Bus Chassis | 221.1 mm | 221.1mm → 220mm |
Not Applicable |
| 2024 Volvo VAH | 221 mm | 221mm → 220mm |
Not Applicable |
| 2024 Volvo VHD | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Chevrolet 6500XD | 222 mm | 222mm → 220mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle) — Frequently Asked Questions
What is the bolt pattern for a 2024 Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle)?
The 2024 Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle) uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220mm and the offset is Not Applicablemm.
What is the center bore of a 2024 Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle)?
The factory center bore (hub bore) for the 2024 Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle) is 220mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2024 Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle)?
Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2024 Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle) use?
The 2024 Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle) uses 22x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2024 Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle)?
Absolutely. Just ensure the aftermarket wheels have a 10x285.75 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 220mm (using hub rings if larger).
Do 2024 Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle)s use lug bolts or lug nuts?
The 2024 MT-55 HHV Chassis (Hydraulic Hybrid Vehicle) requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →