2024 Freightliner MT 55G Front Gasoline Engine Walk in Van Chassis Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Freightliner MT 55G Front Gasoline Engine Walk in Van Chassis is 8x275. It has a center bore of 160 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2024 Freightliner MT 55G Front Gasoline Engine Walk in Van Chassis Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 8x275 |
|---|---|
| Center Bore (Hub Bore) | 160 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2024 MT 55G Front Gasoline Engine Walk in Van Chassis — Year-Specific Fitment Context
The 2024 is the only model year of the Freightliner MT 55G Front Gasoline Engine Walk in Van Chassis in our database using the 8x275 bolt pattern.
2024 Freightliner MT 55G Front Gasoline Engine Walk in Van Chassis Wheel Interchange & Donor Fitment Guide (8x275)
The 8x275 bolt pattern is shared by 8 vehicles in our database (uncommon). For safe wheel swaps on the 2024 Freightliner MT 55G Front Gasoline Engine Walk in Van Chassis, donor rims must match the 8x275 PCD and have a center bore of at least 160 mm:
HUB RING FITMENT Same 8x275 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2026 Chevrolet 4500XD | 161 mm | 161mm → 160mm |
Not Applicable |
| 2024 Freightliner MT 35 Chassis | 161 mm | 161mm → 160mm |
Not Applicable |
| 2024 Freightliner Sport Chassis | 161 mm | 161mm → 160mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Freightliner MT 55G Front Gasoline Engine Walk in Van Chassis — Frequently Asked Questions
What is the bolt pattern for a 2024 Freightliner MT 55G Front Gasoline Engine Walk in Van Chassis?
The 2024 Freightliner MT 55G Front Gasoline Engine Walk in Van Chassis uses a 8x275 bolt pattern (also called lug pattern or PCD). The center bore is 160mm and the offset is Not Applicablemm.
How tight should I torque the lug nuts on a 2024 Freightliner MT 55G Front Gasoline Engine Walk in Van Chassis?
Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2024 Freightliner MT 55G Front Gasoline Engine Walk in Van Chassiss use lug bolts or lug nuts?
The 2024 MT 55G Front Gasoline Engine Walk in Van Chassis requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 160mm center bore important for the 2024 MT 55G Front Gasoline Engine Walk in Van Chassis?
The 160mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does Not Applicablemm offset mean for the 2024 MT 55G Front Gasoline Engine Walk in Van Chassis?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Freightliner.
What is the PCD for a 2024 Freightliner MT 55G Front Gasoline Engine Walk in Van Chassis?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 MT 55G Front Gasoline Engine Walk in Van Chassis, the PCD is 8x275.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →