2000 GMC Yukon Denali Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 GMC Yukon Denali, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 20-30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2000 Yukon Denali — Year-Specific Fitment Context
The 2000 is the only model year of the GMC Yukon Denali in our database using the 6x139.7 bolt pattern.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2000 GMC Yukon Denali
For your 2000 GMC Yukon Denali, the 6x139.7 bolt pattern is unique to this model year. The 78.1mm center bore is critical; aftermarket wheels with a larger bore require hub-centric rings to prevent vibrations and ensure proper load distribution. Offset must stay within 20-30mm to avoid rubbing or suspension interference. Always use 14x1.5 lug nuts with the correct seat type—cone or ball seat—matching the wheel's design. Improper seating can cause wheel detachment. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, GMC Yukon Denali appears from 2000 to 2000 (1 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 50.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Verify aftermarket wheels include hub-centric rings for the 78.1mm bore.
- ✅ Check offset carefully; deviations beyond 20-30mm may require fender modifications.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 GMC Yukon Denali — Frequently Asked Questions
What is the bolt pattern for a 2000 GMC Yukon Denali?
The 2000 GMC Yukon Denali uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 20-30mm.
What is the factory wheel offset for a 2000 GMC Yukon Denali?
The OEM offset for the 2000 Yukon Denali is typically around 20-30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 78.1mm center bore important for the 2000 Yukon Denali?
The 78.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 2000 GMC Yukon Denalis use lug bolts or lug nuts?
The 2000 Yukon Denali requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2000 GMC Yukon Denali?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 Yukon Denali, the PCD is 6x139.7.
What is the center bore of a 2000 GMC Yukon Denali?
The factory center bore (hub bore) for the 2000 GMC Yukon Denali is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset