2024 Honda SXS500M (Pioneer 500) Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Honda SXS500M (Pioneer 500), along with offset and center bore data.
2024 Honda SXS500M (Pioneer 500) Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 4x110 |
|---|---|
| Lug Nut / Bolt Size | 10x1.25 |
| Center Bore (CB) | Not Applicable mm |
| Offset (ET) | Not Applicable |
| Torque Specs | 65 ft-lbs (88 Nm) |
2024 SXS500M (Pioneer 500) — Year-Specific Fitment Context
The 2024 is the only model year of the Honda SXS500M (Pioneer 500) in our database using the 4x110 bolt pattern.
4x110 Pattern Context
This bolt pattern appears on 30 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x110:
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 65 ft-lbs (88 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
2024 Honda SXS500M (Pioneer 500) — Frequently Asked Questions
What is the bolt pattern for a 2024 Honda SXS500M (Pioneer 500)?
The 2024 Honda SXS500M (Pioneer 500) uses a 4x110 bolt pattern (also called lug pattern or PCD). The center bore is Not Applicablemm and the offset is Not Applicablemm.
How tight should I torque the lug nuts on a 2024 Honda SXS500M (Pioneer 500)?
Refer to your owner's manual for exact specs, but always tighten the 10x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2024 Honda SXS500M (Pioneer 500)?
The OEM offset for the 2024 SXS500M (Pioneer 500) is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2024 Honda SXS500M (Pioneer 500)?
Yes, but ensure the wheel spacers match the 4x110 bolt pattern and Not Applicablemm center bore. Also verify that you have enough thread engagement for your 10x1.25 hardware.
What is the center bore of a 2024 Honda SXS500M (Pioneer 500)?
The factory center bore (hub bore) for the 2024 Honda SXS500M (Pioneer 500) is Not Applicablemm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Honda fit my 2024 SXS500M (Pioneer 500)?
Only if they share the exact same 4x110 bolt pattern, a compatible offset, and a center bore equal to or larger than Not Applicablemm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset