2008 Lamborghini Murcielago LP640 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Lamborghini Murcielago LP640, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 70.1 mm |
| Offset (ET) | Wait-Verify |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 Murcielago LP640 — Year-Specific Fitment Context
The 2008 is the only model year of the Lamborghini Murcielago LP640 in our database using the 5x120 bolt pattern.
Fitment Notes
The 2008 Lamborghini Murcielago LP640 has a bolt pattern of 5x120.
This means it is a 5 lug pattern with a circle diameter of 120mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Lamborghini Murcielago LP640 appears from 2008 to 2008 (1 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
2008 Lamborghini Murcielago LP640 — Frequently Asked Questions
What is the bolt pattern for a 2008 Lamborghini Murcielago LP640?
The 2008 Lamborghini Murcielago LP640 uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 70.1mm and the offset is Wait-Verifymm.
Can I put aftermarket wheels on my 2008 Lamborghini Murcielago LP640?
Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near Wait-Verifymm, and a center bore of at least 70.1mm (using hub rings if larger).
What is the factory wheel offset for a 2008 Lamborghini Murcielago LP640?
The OEM offset for the 2008 Murcielago LP640 is typically around Wait-Verifymm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2008 Lamborghini Murcielago LP640?
The factory center bore (hub bore) for the 2008 Lamborghini Murcielago LP640 is 70.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2008 Lamborghini Murcielago LP640?
Refer to your owner's manual for exact specs, but always tighten the M14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Lamborghini fit my 2008 Murcielago LP640?
Only if they share the exact same 5x120 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.1mm.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Lamborghini Murcielago LP640 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2008-2008 (1 model years).
- Observed bolt-pattern variants: 1 (5x120).
- Offset records vary by wheel setup; confirm wheel width and brake clearance before final fitment.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2008 Lamborghini Murcielago LP640, please report it via our About page contact so we can verify and update this record.