2026 Acura ZDX Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Acura ZDX is 6x120. It has a center bore of 66.9 mm, an offset range of 35-45, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2026 Acura ZDX Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x120 |
|---|---|
| Center Bore (Hub Bore) | 66.9 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
2026 ZDX — Year-Specific Fitment Context
The 2026 model year is the final year of the Acura ZDX's 6x120 bolt pattern run (since 2024). Wheels from any 2024–2026 Acura ZDX are cross-compatible with the 2026 model. Across its full production run (2010–2026), the ZDX has also used: 5x114.3.
Acura ZDX Bolt Pattern by Year
Looking for all generations? View the complete Acura ZDX (2010–2026) Bolt Pattern & Generation Guide →
The table below shows how the ZDX's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Acura ZDX Wheel Interchange & Donor Fitment Guide (6x120)
The 6x120 bolt pattern is shared by 94 vehicles in our database (uncommon). For safe wheel swaps on the 2026 Acura ZDX, donor rims must match the 6x120 PCD and have a center bore of at least 66.9 mm:
DIRECT HUB MATCH Same 6x120 Pattern & Exact 66.9mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2019 Buick Enclave | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2025 Cadillac LYRIQ | 66.9 mm (Exact) | 35-45 | 14x1.5 (Cone) |
| 2020 Cadillac XT5 | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2025 Cadillac XT6 | 66.9 mm (Exact) | 35-45 | 14x1.5 (Cone) |
| 2019 Chevrolet Blazer | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2024 Chevrolet Blazer EV | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Acura ZDX — Frequently Asked Questions
What is the bolt pattern for a 2026 Acura ZDX?
The 2026 Acura ZDX uses a 6x120 bolt pattern (also called lug pattern or PCD). The center bore is 66.9mm and the offset is 35-45mm.
What other years of Acura ZDX have the same bolt pattern as the 2026?
The Acura ZDX uses the 6x120 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2026 Acura ZDX?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2026 Acura ZDX?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 ZDX, the PCD is 6x120.
How do I measure the bolt pattern on my 2026 Acura?
The 2026 ZDX uses a 6x120 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2026 Acura ZDX use?
The 2026 Acura ZDX uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →