2011 Aston Martin Rapide Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Aston Martin Rapide, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x128 |
|---|---|
| Lug Nut / Bolt Size | B 14x2.00 |
| Center Bore (CB) | 68.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 150 ft-lbs (204 Nm) |
2011 Rapide — Year-Specific Fitment Context
The 2011 Aston Martin Rapide is in year 2 of 3 using the 5x128 pattern (2010–2012). Wheels from any 2010–2012 Aston Martin Rapide are cross-compatible with the 2011 model.
Aston Martin Rapide Bolt Pattern by Year
The table below shows how the Rapide's wheel specifications have changed over the years. The 2011 model year is highlighted.
Fitment Notes
The 2011 Aston Martin Rapide has a bolt pattern of 5x128.
This means it is a 5 lug pattern with a circle diameter of 128mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Aston Martin Rapide appears from 2010 to 2012 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x128 Pattern Context
This bolt pattern appears on 11 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x128:
2011 Aston Martin Rapide — Frequently Asked Questions
What is the bolt pattern for a 2011 Aston Martin Rapide?
The 2011 Aston Martin Rapide uses a 5x128 bolt pattern (also called lug pattern or PCD). The center bore is 68.1mm and the offset is 42mm.
What other years of Aston Martin Rapide have the same bolt pattern as the 2011?
The Aston Martin Rapide uses the 5x128 pattern from 2010 through 2012. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What does 42mm offset mean for the 2011 Rapide?
An offset of 42mm means the wheel's mounting surface is 42mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Aston Martin.
Why is matching the 68.1mm center bore important for the 2011 Rapide?
The 68.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2011 Aston Martin Rapide?
The factory center bore (hub bore) for the 2011 Aston Martin Rapide is 68.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Aston Martin fit my 2011 Rapide?
Only if they share the exact same 5x128 bolt pattern, a compatible offset, and a center bore equal to or larger than 68.1mm.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
- This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Editorial Fitment Notes
Aston Martin Rapide is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2010-2012 (3 model years).
- Observed bolt-pattern variants: 1 (5x128).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2011 Aston Martin Rapide, please report it via our About page contact so we can verify and update this record.