2025 Audi Q6 e-tron Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Audi Q6 e-tron, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.5 mm |
| Offset (ET) | 30-45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2025 Q6 e-tron — Year-Specific Fitment Context
The 2025 is the only model year of the Audi Q6 e-tron in our database using the 5x112 bolt pattern.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2025 Audi Q6 e-tron
For the 2025 Audi Q6 e-tron, the 5x112 bolt pattern and 66.5mm center bore are critical. Aftermarket wheels must be hub-centric; use hub-centric rings to avoid vibrations. Offset must stay within 30-45mm to prevent rubbing or suspension interference. Always use 14x1.5 lug nuts with the correct seat type (cone or ball) to ensure proper clamping. Mismatched seats can cause wheel loosening. Re-torque after 50-100 miles. Verify load rating meets vehicle requirements.
Historical Fitment Data Reference
In our dataset, Audi Q6 e-tron appears from 2025 to 2025 (1 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 75.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 ft-lb after 50-100 miles of driving.
- ✅ Ensure aftermarket wheels have a center bore of at least 66.5mm; use hub-centric rings if larger.
- ✅ Check that lug nuts match the wheel's seat type (cone or ball) to avoid improper seating.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Audi Q6 e-tron — Frequently Asked Questions
What is the bolt pattern for a 2025 Audi Q6 e-tron?
The 2025 Audi Q6 e-tron uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 30-45mm.
What is the center bore of a 2025 Audi Q6 e-tron?
The factory center bore (hub bore) for the 2025 Audi Q6 e-tron is 66.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2025 Audi Q6 e-tron?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 Q6 e-tron, the PCD is 5x112.
How tight should I torque the lug nuts on a 2025 Audi Q6 e-tron?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Audi fit my 2025 Q6 e-tron?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.5mm.
What is the factory wheel offset for a 2025 Audi Q6 e-tron?
The OEM offset for the 2025 Q6 e-tron is typically around 30-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset