2026 Audi SQ6 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Audi SQ6 is 5x112. It has a center bore of 66.5 mm, an offset range of 35-45, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2026 Audi SQ6 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.5 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2026 SQ6 — Year-Specific Fitment Context
The 2026 model year is the final year of the Audi SQ6's 5x112 bolt pattern run (since 2025). Wheels from any 2025–2026 Audi SQ6 are cross-compatible with the 2026 model.
Audi SQ6 Bolt Pattern by Year
Looking for all generations? View the complete Audi SQ6 (2025–2026) Bolt Pattern & Generation Guide →
The table below shows how the SQ6's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2025 | 5x112 | 66.5 | 35-45 |
| ▸ 2026 | 5x112 | 66.5 | 35-45 |
2026 Audi SQ6 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 Audi SQ6, donor rims must match the 5x112 PCD and have a center bore of at least 66.5 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2019 Mercedes-Benz Mercedes-AMG GLE Coupe | 66.6 mm (Exact) | 30-50 | 14x1.5 (Ball) |
| 2019 Mercedes-Benz Mercedes-AMG GLS | 66.6 mm (Exact) | 30-50 | 14x1.5 (Ball) |
| 2024 Mercedes-Benz Mercedes-AMG GT | 66.6 mm (Exact) | 30-50 | 14x1.5 (Ball) |
| 2019 Mercedes-Benz Mercedes-AMG S-Class | 66.6 mm (Exact) | 49 | B 14x1.50 (Ball) |
| 2022 Mercedes-Benz Mercedes-AMG SL | 66.6 mm (Exact) | 30-50 | 14x1.5 (Ball) |
| 2019 Mercedes-Benz Mercedes-AMG SLC | 66.6 mm (Exact) | 30-50 | 14x1.5 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Audi SQ6 — Frequently Asked Questions
What is the bolt pattern for a 2026 Audi SQ6?
The 2026 Audi SQ6 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 35-45mm.
What other years of Audi SQ6 have the same bolt pattern as the 2026?
The Audi SQ6 uses the 5x112 pattern from 2025 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2026 Audi SQ6?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 35-45mm, and a center bore of at least 66.5mm (using hub rings if larger).
What is the PCD for a 2026 Audi SQ6?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 SQ6, the PCD is 5x112.
How tight should I torque the lug nuts on a 2026 Audi SQ6?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2026 Audi SQ6 use?
The 2026 Audi SQ6 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →