2024 BMW 228i Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 BMW 228i is 5x112. It has a center bore of 66.6 mm, an offset range of 35-45, and utilizes 14x1.25 (Cone seat, 17mm hex) fasteners tightened to 101 ft-lbs (140 Nm).
2024 BMW 228i Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 101 ft-lbs (140 Nm) |
2024 228i — Year-Specific Fitment Context
The 2024 model year marks the beginning of the BMW 228i's 5x112 bolt pattern era, which continued through 2026 (3 consecutive years). Wheels from any 2024–2026 BMW 228i are cross-compatible with the 2024 model.
BMW 228i Bolt Pattern by Year
Looking for all generations? View the complete BMW 228i (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the 228i's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 BMW 228i Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2024 BMW 228i, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Audi RS 5 | 66.5 mm (Exact) | 22-26 | 14x1.5 (Ball) |
| 2021 Audi RS 6 | 66.6 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2025 Audi RS 6 Avant | 66.5 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2017 Audi RS 7 | 66.5 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2023 Audi RS e-tron GT | 66.6 mm (Exact) | 38 | B 14x1.50 (Ball) |
| 2025 Audi RS Q8 | 66.5 mm (Exact) | 25-35 | 14x1.5 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 101 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 BMW 228i — Frequently Asked Questions
What is the bolt pattern for a 2024 BMW 228i?
The 2024 BMW 228i uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 35-45mm.
What other years of BMW 228i have the same bolt pattern as the 2024?
The BMW 228i uses the 5x112 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2024 BMW 228i?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 35-45mm, and a center bore of at least 66.6mm (using hub rings if larger).
How do I measure the bolt pattern on my 2024 BMW?
The 2024 228i uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2024 BMW 228is use lug bolts or lug nuts?
The 2024 228i requires 14x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2024 BMW 228i?
Refer to your owner's manual for exact specs, but always tighten the 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →