2026 BMW i7 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 BMW i7 is 5x112. It has a center bore of 66.6 mm, an offset range of 30-40, and utilizes 14x1.25 (Cone seat, 17mm hex) fasteners tightened to 101 ft-lbs (137 Nm).
2026 BMW i7 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 30-40 |
| Thread Size (Lug Nut / Bolt) | 14x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 101 ft-lbs (137 Nm) |
2026 i7 — Year-Specific Fitment Context
The 2026 model year is the final year of the BMW i7's 5x112 bolt pattern run (since 2023). Wheels from any 2023–2026 BMW i7 are cross-compatible with the 2026 model.
BMW i7 Bolt Pattern by Year
Looking for all generations? View the complete BMW i7 (2023–2026) Bolt Pattern & Generation Guide →
The table below shows how the i7's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 BMW i7 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 BMW i7, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 BMW X3 | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2025 BMW X3 M | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2020 BMW X4 | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2024 BMW X4 M | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2019 BMW X5 | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2021 BMW X5 M | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 101 ft-lbs (137 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 BMW i7 — Frequently Asked Questions
What is the bolt pattern for a 2026 BMW i7?
The 2026 BMW i7 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-40mm.
What other years of BMW i7 have the same bolt pattern as the 2026?
The BMW i7 uses the 5x112 pattern from 2023 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Do 2026 BMW i7s use lug bolts or lug nuts?
The 2026 i7 requires 14x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2026 BMW?
The 2026 i7 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2026 BMW i7?
The OEM offset for the 2026 i7 is typically around 30-40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2026 BMW i7?
Refer to your owner's manual for exact specs, but always tighten the 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →