1992 Buick Skylark Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Buick Skylark, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1992 Skylark — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Buick Skylark's 5x100 bolt pattern era, which continued through 1998 (7 consecutive years). Wheels from any 1992–1998 Buick Skylark are cross-compatible with the 1992 model.
Buick Skylark Bolt Pattern by Year
The table below shows how the Skylark's wheel specifications have changed over the years. The 1992 model year is highlighted.
Fitment Notes
The 1992 Buick Skylark has a bolt pattern of 5x100.
This means it is a 5 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Buick Skylark appears from 1992 to 1998 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
1992 Buick Skylark — Frequently Asked Questions
What is the bolt pattern for a 1992 Buick Skylark?
The 1992 Buick Skylark uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 42mm.
What other years of Buick Skylark have the same bolt pattern as the 1992?
The Buick Skylark uses the 5x100 pattern from 1992 through 1998. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1992 Buick Skylark?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 1992 Buick Skylark?
The OEM offset for the 1992 Skylark is typically around 42mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 57.1mm center bore important for the 1992 Skylark?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 1992 Buick Skylarks use lug bolts or lug nuts?
The 1992 Skylark requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Buick Skylark is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1998 (7 model years).
- Observed bolt-pattern variants: 1 (5x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-14 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1992 Buick Skylark, please report it via our About page contact so we can verify and update this record.