1992 Dodge Daytona Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Dodge Daytona, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1992 Daytona — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Dodge Daytona's 5x100 bolt pattern era, which continued through 1993 (2 consecutive years). Wheels from any 1992–1993 Dodge Daytona are cross-compatible with the 1992 model.
Dodge Daytona Bolt Pattern by Year
The table below shows how the Daytona's wheel specifications have changed over the years. The 1992 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1992 | 5x100 | 57.1 | 42 |
| 1993 | 5x100 | 57.1 | 42 |
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 1992 Dodge Daytona
For your 1992 Dodge Daytona, the bolt pattern is 5x100 with a critical center bore of 57.1mm. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load distribution. The offset is 42mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree). Ball-seat lug nuts are unsafe and can lead to wheel loss. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Dodge Daytona appears from 1992 to 1993 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 57.1mm.
- ✅ Avoid wheels with offset below 35mm (too aggressive) or above 48mm (may contact struts).
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Dodge Daytona — Frequently Asked Questions
What is the bolt pattern for a 1992 Dodge Daytona?
The 1992 Dodge Daytona uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 42mm.
What other years of Dodge Daytona have the same bolt pattern as the 1992?
The Dodge Daytona uses the 5x100 pattern from 1992 through 1993. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1992 Dodge Daytona?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Dodge fit my 1992 Daytona?
Only if they share the exact same 5x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
Can I put aftermarket wheels on my 1992 Dodge Daytona?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 42mm, and a center bore of at least 57.1mm (using hub rings if larger).
Do 1992 Dodge Daytonas use lug bolts or lug nuts?
The 1992 Daytona requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset