2012 FIAT 500 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 FIAT 500, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x98 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.25 |
| Center Bore (CB) | 58.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2012 500 — Year-Specific Fitment Context
The 2012 model year marks the beginning of the FIAT 500's 4x98 bolt pattern era, which continued through 2019 (8 consecutive years). Wheels from any 2012–2019 FIAT 500 are cross-compatible with the 2012 model.
FIAT 500 Bolt Pattern by Year
The table below shows how the 500's wheel specifications have changed over the years. The 2012 model year is highlighted.
4x98 Pattern Context
This bolt pattern appears on 35 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x98:
Expert Buying Guide for 2012 FIAT 500
For your 2012 FIAT 500, the 4x98 bolt pattern and 58.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive: stock is 42mm, but deviations beyond ±5mm may cause rubbing or clearance issues. Always verify offset with test fitment. Safety warning: Use only M12x1.25 lug nuts with the correct seat type (cone or ball seat, matching your wheels). Incorrect thread pitch or seat can lead to wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, FIAT 500 appears from 2012 to 2019 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 58.1mm bore.
- ✅ Avoid spacers unless necessary; if used, ensure extended studs and proper offset to maintain scrub radius.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 FIAT 500 — Frequently Asked Questions
What is the bolt pattern for a 2012 FIAT 500?
The 2012 FIAT 500 uses a 4x98 bolt pattern (also called lug pattern or PCD). The center bore is 58.1mm and the offset is 42mm.
What other years of FIAT 500 have the same bolt pattern as the 2012?
The FIAT 500 uses the 4x98 pattern from 2012 through 2019. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
Will wheels from another FIAT fit my 2012 500?
Only if they share the exact same 4x98 bolt pattern, a compatible offset, and a center bore equal to or larger than 58.1mm.
Do 2012 FIAT 500s use lug bolts or lug nuts?
The 2012 500 requires B 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 58.1mm center bore important for the 2012 500?
The 58.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2012 FIAT 500?
The factory center bore (hub bore) for the 2012 FIAT 500 is 58.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset