2014 FIAT 500c Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 FIAT 500c, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 4x98
Lug Nut / Bolt Size B 12x1.25
Center Bore (CB) 58.1 mm
Offset (ET) 42
Torque Specs 80 ft-lbs (108 Nm)

2014 500c — Year-Specific Fitment Context

The 2014 model year marks the beginning of the FIAT 500c's 4x98 bolt pattern era, which continued through 2019 (6 consecutive years). Wheels from any 2014–2019 FIAT 500c are cross-compatible with the 2014 model.

FIAT 500c Bolt Pattern by Year

The table below shows how the 500c's wheel specifications have changed over the years. The 2014 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 2014 4x98 58.1 42
2015 4x98 58.1 42
2016 4x98 58.1 42
2017 4x98 58.1 42
2018 4x98 58.1 35
2019 4x98 58.1 35

4x98 Pattern Context

This bolt pattern appears on 35 vehicles in our current database and is considered uncommon.

Examples of other vehicles using 4x98:

Expert Buying Guide for 2014 FIAT 500c

For your 2014 FIAT 500c, the 4x98 bolt pattern and 58.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load distribution. The offset should stay within 42mm ±5mm; deviations risk rubbing or poor handling. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical/60-degree or ball seat as per wheel manufacturer). Improper lug nuts can cause wheel loosening. Verify that aftermarket wheels are load-rated for your vehicle's weight.

Historical Fitment Data Reference

In our dataset, FIAT 500c appears from 2014 to 2019 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.

  • Observed bolt-pattern variants for this model: 1
  • Observed center-bore variants for this model: 1
  • Observed lug-size variants for this model: 2
  • Observed total offset span across years: 7.0 mm

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2014 FIAT 500c — Frequently Asked Questions

What is the bolt pattern for a 2014 FIAT 500c?

The 2014 FIAT 500c uses a 4x98 bolt pattern (also called lug pattern or PCD). The center bore is 58.1mm and the offset is 42mm.

What other years of FIAT 500c have the same bolt pattern as the 2014?

The FIAT 500c uses the 4x98 pattern from 2014 through 2019. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.

What does 42mm offset mean for the 2014 500c?

An offset of 42mm means the wheel's mounting surface is 42mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your FIAT.

What lug nut size does the 2014 FIAT 500c use?

The 2014 FIAT 500c uses B 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

Can I put aftermarket wheels on my 2014 FIAT 500c?

Absolutely. Just ensure the aftermarket wheels have a 4x98 bolt pattern, an offset near 42mm, and a center bore of at least 58.1mm (using hub rings if larger).

Can I use spacers on my 2014 FIAT 500c?

Yes, but ensure the wheel spacers match the 4x98 bolt pattern and 58.1mm center bore. Also verify that you have enough thread engagement for your B 12x1.25 hardware.

Need more vehicle fitment data?

Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.

Get the Full Dataset
Confidence Level
High
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-07-08

FIAT 500c By Year

2014 2015 2016 2017 2018 2019

Other FIAT Models

124 Spider 500 500 Abarth 500L 500X 500c 500c Abarth 500e