2025 Ford Mustang GTD Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Ford Mustang GTD is 5x114.3 (5x4.5"). It has a center bore of 70.5 mm, an offset range of Not Applicable, and utilizes 14x1.5 (Cone seat, 21mm hex) fasteners tightened to 150 ft-lbs (203 Nm).
2025 Ford Mustang GTD Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 70.5 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 150 ft-lbs (203 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Mustang GTD — Year-Specific Fitment Context
The 2025 model year marks the beginning of the Ford Mustang GTD's 5x114.3 bolt pattern era, which continued through 2026 (2 consecutive years). Wheels from any 2025–2026 Ford Mustang GTD are cross-compatible with the 2025 model.
Ford Mustang GTD Bolt Pattern by Year
Looking for all generations? View the complete Ford Mustang GTD (2025–2026) Bolt Pattern & Generation Guide →
The table below shows how the Mustang GTD's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2025 | 5x114.3 | 70.5 | Not Applicable |
| 2026 | 5x114.3 | 70.5 | Not Applicable |
2025 Ford Mustang GTD Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Ford Mustang GTD, donor rims must match the 5x114.3 PCD and have a center bore of at least 70.5 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 70.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Lincoln Aviator | 70.5 mm (Exact) | 50 | 14x1.5 (Cone) |
| 1995 Lincoln Continental | 70.5 mm (Exact) | 40 | N 12x1.50 (Cone) |
| 1995 Lincoln Town Car | 70.5 mm (Exact) | 10 | N 1/2" (Cone) |
| 1994 Mercury Grand Marquis | 70.5 mm (Exact) | 0-40 | 1/2 20 (Cone) |
| 2003 Mercury Sable | 70.5 mm (Exact) | 40 | 12x1.5 (Cone) |
| 2003 Mercury Marauder | 70.6 mm (Exact) | 30-50mm | 1/2-20 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1997 Jeep Wrangler | 71.6 mm | 71.6mm → 70.5mm |
25 |
| 2021 Maserati Quattroporte | 78.1 mm | 78.1mm → 70.5mm |
45 |
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 70.5mm |
12 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 150 ft-lbs (203 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Ford Mustang GTD — Frequently Asked Questions
What is the bolt pattern for a 2025 Ford Mustang GTD?
The 2025 Ford Mustang GTD uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is Not Applicablemm.
What other years of Ford Mustang GTD have the same bolt pattern as the 2025?
The Ford Mustang GTD uses the 5x114.3 pattern from 2025 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Can I use spacers on my 2025 Ford Mustang GTD?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 70.5mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Why is matching the 70.5mm center bore important for the 2025 Mustang GTD?
The 70.5mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2025 Ford Mustang GTD?
The OEM offset for the 2025 Mustang GTD is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2025 Ford Mustang GTD?
The factory center bore (hub bore) for the 2025 Ford Mustang GTD is 70.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →