2025 Freightliner B2 106 Conventional Chassis Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Freightliner B2 106 Conventional Chassis, along with offset and center bore data.
2025 Freightliner B2 106 Conventional Chassis Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Lug Nut / Bolt Size | 22x1.5 |
| Center Bore (CB) | 222 mm |
| Offset (ET) | Not Applicable |
| Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2025 B2 106 Conventional Chassis — Year-Specific Fitment Context
The 2025 model year is the final year of the Freightliner B2 106 Conventional Chassis's 10x285.75 bolt pattern run (since 2024). Wheels from any 2024–2025 Freightliner B2 106 Conventional Chassis are cross-compatible with the 2025 model.
Freightliner B2 106 Conventional Chassis Bolt Pattern by Year
The table below shows how the B2 106 Conventional Chassis's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2024 | 10x285.75 | 220.1 | Not Applicable |
| ▸ 2025 | 10x285.75 | 222 | Not Applicable |
10x285.75 Pattern Context
This bolt pattern appears on 149 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 10x285.75:
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
2025 Freightliner B2 106 Conventional Chassis — Frequently Asked Questions
What is the bolt pattern for a 2025 Freightliner B2 106 Conventional Chassis?
The 2025 Freightliner B2 106 Conventional Chassis uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 222mm and the offset is Not Applicablemm.
What other years of Freightliner B2 106 Conventional Chassis have the same bolt pattern as the 2025?
The Freightliner B2 106 Conventional Chassis uses the 10x285.75 pattern from 2024 through 2025. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Do 2025 Freightliner B2 106 Conventional Chassiss use lug bolts or lug nuts?
The 2025 B2 106 Conventional Chassis requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2025 Freightliner?
The 2025 B2 106 Conventional Chassis uses a 10x285.75 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2025 Freightliner B2 106 Conventional Chassis?
Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2025 Freightliner B2 106 Conventional Chassis?
Absolutely. Just ensure the aftermarket wheels have a 10x285.75 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 222mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset