2026 Freightliner Coronado Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Freightliner Coronado is 10x285.75. It has a center bore of 220 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Cone seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2026 Freightliner Coronado Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Center Bore (Hub Bore) | 220 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2026 Coronado — Year-Specific Fitment Context
The 2026 model year is the final year of the Freightliner Coronado's 10x285.75 bolt pattern run (since 2024). Wheels from any 2024–2026 Freightliner Coronado are cross-compatible with the 2026 model.
Freightliner Coronado Bolt Pattern by Year
Looking for all generations? View the complete Freightliner Coronado (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Coronado's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Freightliner Coronado Wheel Interchange & Donor Fitment Guide (10x285.75)
The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2026 Freightliner Coronado, donor rims must match the 10x285.75 PCD and have a center bore of at least 220 mm:
DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Freightliner S2RV 106 Conventional cab & Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner SD122 | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner VCL Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner XB Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner XB Straight Rail Rear Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner XBP Rear Engine Commercial Bus Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Volvo VAH | 221 mm | 221mm → 220mm |
Not Applicable |
| 2024 Volvo VHD | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Chevrolet 6500XD | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Freightliner EF Front Engine Bus Chassis | 221.1 mm | 221.1mm → 220mm |
Not Applicable |
| 2024 Freightliner EFX Front Engine Bus Chassis | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Freightliner MD109 | 222 mm | 222mm → 220mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Freightliner Coronado — Frequently Asked Questions
What is the bolt pattern for a 2026 Freightliner Coronado?
The 2026 Freightliner Coronado uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220mm and the offset is Not Applicablemm.
What other years of Freightliner Coronado have the same bolt pattern as the 2026?
The Freightliner Coronado uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What lug nut size does the 2026 Freightliner Coronado use?
The 2026 Freightliner Coronado uses 22x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2026 Freightliner Coronados use lug bolts or lug nuts?
The 2026 Coronado requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2026 Freightliner Coronado?
Yes, but ensure the wheel spacers match the 10x285.75 bolt pattern and 220mm center bore. Also verify that you have enough thread engagement for your 22x1.5 hardware.
What does Not Applicablemm offset mean for the 2026 Coronado?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Freightliner.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →