2024 Freightliner CST112 Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Freightliner CST112 is 10x285.75. It has a center bore of 220.1 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Cone seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).

2024 Freightliner CST112 Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 10x285.75
Center Bore (Hub Bore) 220.1 mm
Offset Range (ET) Not Applicable
Thread Size (Lug Nut / Bolt) 22x1.5
Fastener Seat Type Conical 60° (Cone / Tapered)
Lug Wrench / Socket Hex Size 33mm
Wheel Torque Specs 450-500 ft-lbs (610-678 Nm)
🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2024 CST112 — Year-Specific Fitment Context

The 2024 is the only model year of the Freightliner CST112 in our database using the 10x285.75 bolt pattern.

2024 Freightliner CST112 Wheel Interchange & Donor Fitment Guide (10x285.75)

The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2024 Freightliner CST112, donor rims must match the 10x285.75 PCD and have a center bore of at least 220.1 mm:

DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2026 Freightliner XB Chassis 220 mm (Exact) Not Applicable 22x1.5 (Cone)
2024 Freightliner XB Straight Rail Rear Engine Motor Home Chassis 220.1 mm (Exact) Not Applicable 22x1.5 (Flat)
2024 Freightliner XBP Rear Engine Commercial Bus Chassis 220 mm (Exact) Not Applicable 22x1.5 (Cone)
2024 Freightliner XBR Rail Rear Engine Shuttle Bus Chassis 220 mm (Exact) Not Applicable 22x1.5 (Cone)
2025 Freightliner XBS Straight Rail Rear Engine Shuttle Bus Chassis 220.1 mm (Exact) Not Applicable M22x1.5 (Flat)
2024 Freightliner XC Chassis 220 mm (Exact) Not Applicable 22x1.5 (Cone)

HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2024 Volvo VAH 221 mm 221mm → 220.1mm Not Applicable
2024 Volvo VHD 222 mm 222mm → 220.1mm Not Applicable
2024 Chevrolet 6500XD 222 mm 222mm → 220.1mm Not Applicable
2024 Freightliner EF Front Engine Bus Chassis 221.1 mm 221.1mm → 220.1mm Not Applicable
2024 Freightliner EFX Front Engine Bus Chassis 222 mm 222mm → 220.1mm Not Applicable
2024 Freightliner MD109 222 mm 222mm → 220.1mm Not Applicable
Looking for all models? View the complete directory of vehicles with 10x285.75 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2024 Freightliner CST112 — Frequently Asked Questions

What is the bolt pattern for a 2024 Freightliner CST112?

The 2024 Freightliner CST112 uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220.1mm and the offset is Not Applicablemm.

Can I put aftermarket wheels on my 2024 Freightliner CST112?

Absolutely. Just ensure the aftermarket wheels have a 10x285.75 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 220.1mm (using hub rings if larger).

Will wheels from another Freightliner fit my 2024 CST112?

Only if they share the exact same 10x285.75 bolt pattern, a compatible offset, and a center bore equal to or larger than 220.1mm.

What is the center bore of a 2024 Freightliner CST112?

The factory center bore (hub bore) for the 2024 Freightliner CST112 is 220.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

What is the factory wheel offset for a 2024 Freightliner CST112?

The OEM offset for the 2024 CST112 is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

What does Not Applicablemm offset mean for the 2024 CST112?

An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Freightliner.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Other Freightliner Models

Cascadia Columbia Coronado EFX Front Engine Bus Chassis FL112 FL60 FLD112 FS 65 Chassis MBO Chassis MC Front Engine Motor Home Chassis MCL Front Engine Motor Home Chassis MT 35 Chassis MT 55 Chassis RA Cascadia Sprinter 3500 Cargo Sprinter 4500 Crew Sprinter WORKER Cargo VCL Chassis XB Straight Rail Rear Engine Motor Home Chassis XC Raised Rail Rear Engine Motor Home Chassis

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)