2024 Freightliner XC Chassis Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Freightliner XC Chassis is 10x285.75. It has a center bore of 220 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Cone seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2024 Freightliner XC Chassis Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Center Bore (Hub Bore) | 220 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2024 XC Chassis — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Freightliner XC Chassis's 10x285.75 bolt pattern era, which continued through 2026 (3 consecutive years). Wheels from any 2024–2026 Freightliner XC Chassis are cross-compatible with the 2024 model.
Freightliner XC Chassis Bolt Pattern by Year
Looking for all generations? View the complete Freightliner XC Chassis (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the XC Chassis's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 Freightliner XC Chassis Wheel Interchange & Donor Fitment Guide (10x285.75)
The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2024 Freightliner XC Chassis, donor rims must match the 10x285.75 PCD and have a center bore of at least 220 mm:
DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Freightliner XC Raised Rail (Lowered Engine) Rear Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner XC Raised Rail Rear Engine Motor Home Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner XC-F Formed Rail Rear Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner XC-L Lowered Rail Rear Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner XC-M Modular Rail Rear Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner XC-P Powerliner Raise Rail Rear Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Volvo VAH | 221 mm | 221mm → 220mm |
Not Applicable |
| 2024 Volvo VHD | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Chevrolet 6500XD | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Freightliner EF Front Engine Bus Chassis | 221.1 mm | 221.1mm → 220mm |
Not Applicable |
| 2024 Freightliner EFX Front Engine Bus Chassis | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Freightliner MD109 | 222 mm | 222mm → 220mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Freightliner XC Chassis — Frequently Asked Questions
What is the bolt pattern for a 2024 Freightliner XC Chassis?
The 2024 Freightliner XC Chassis uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220mm and the offset is Not Applicablemm.
What other years of Freightliner XC Chassis have the same bolt pattern as the 2024?
The Freightliner XC Chassis uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Will wheels from another Freightliner fit my 2024 XC Chassis?
Only if they share the exact same 10x285.75 bolt pattern, a compatible offset, and a center bore equal to or larger than 220mm.
Do 2024 Freightliner XC Chassiss use lug bolts or lug nuts?
The 2024 XC Chassis requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2024 Freightliner XC Chassis?
Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2024 Freightliner?
The 2024 XC Chassis uses a 10x285.75 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →