2025 Freightliner EFX Front Engine Bus Chassis Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Freightliner EFX Front Engine Bus Chassis is 10x285.75. It has a center bore of 222 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2025 Freightliner EFX Front Engine Bus Chassis Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Center Bore (Hub Bore) | 222 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2025 EFX Front Engine Bus Chassis — Year-Specific Fitment Context
The 2025 Freightliner EFX Front Engine Bus Chassis is in year 2 of 3 using the 10x285.75 pattern (2024–2026). Wheels from any 2024–2026 Freightliner EFX Front Engine Bus Chassis are cross-compatible with the 2025 model.
Freightliner EFX Front Engine Bus Chassis Bolt Pattern by Year
Looking for all generations? View the complete Freightliner EFX Front Engine Bus Chassis (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the EFX Front Engine Bus Chassis's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Freightliner EFX Front Engine Bus Chassis Wheel Interchange & Donor Fitment Guide (10x285.75)
The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2025 Freightliner EFX Front Engine Bus Chassis, donor rims must match the 10x285.75 PCD and have a center bore of at least 222 mm:
DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 222mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Freightliner MD109 | 222 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Volvo VHD | 222 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Chevrolet 6500XD | 222 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Freightliner EFX Front Engine Bus Chassis — Frequently Asked Questions
What is the bolt pattern for a 2025 Freightliner EFX Front Engine Bus Chassis?
The 2025 Freightliner EFX Front Engine Bus Chassis uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 222mm and the offset is Not Applicablemm.
What other years of Freightliner EFX Front Engine Bus Chassis have the same bolt pattern as the 2025?
The Freightliner EFX Front Engine Bus Chassis uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Do 2025 Freightliner EFX Front Engine Bus Chassiss use lug bolts or lug nuts?
The 2025 EFX Front Engine Bus Chassis requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2025 Freightliner EFX Front Engine Bus Chassis?
The OEM offset for the 2025 EFX Front Engine Bus Chassis is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2025 Freightliner EFX Front Engine Bus Chassis?
Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2025 Freightliner EFX Front Engine Bus Chassis?
The factory center bore (hub bore) for the 2025 Freightliner EFX Front Engine Bus Chassis is 222mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →