2024 Freightliner eM2 106 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Freightliner eM2 106, along with offset and center bore data.
2024 Freightliner eM2 106 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Lug Nut / Bolt Size | 22x1.5 |
| Center Bore (CB) | 220 mm |
| Offset (ET) | Not Applicable |
| Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2024 eM2 106 — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Freightliner eM2 106's 10x285.75 bolt pattern era, which continued through 2025 (2 consecutive years). Wheels from any 2024–2025 Freightliner eM2 106 are cross-compatible with the 2024 model.
Freightliner eM2 106 Bolt Pattern by Year
The table below shows how the eM2 106's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2024 | 10x285.75 | 220 | Not Applicable |
| 2025 | 10x285.75 | 220 | Not Applicable |
10x285.75 Pattern Context
This bolt pattern appears on 149 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 10x285.75:
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
2024 Freightliner eM2 106 — Frequently Asked Questions
What is the bolt pattern for a 2024 Freightliner eM2 106?
The 2024 Freightliner eM2 106 uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220mm and the offset is Not Applicablemm.
What other years of Freightliner eM2 106 have the same bolt pattern as the 2024?
The Freightliner eM2 106 uses the 10x285.75 pattern from 2024 through 2025. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2024 Freightliner eM2 106?
Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2024 Freightliner eM2 106?
The OEM offset for the 2024 eM2 106 is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2024 Freightliner?
The 2024 eM2 106 uses a 10x285.75 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2024 Freightliner eM2 106?
Absolutely. Just ensure the aftermarket wheels have a 10x285.75 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 220mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset