2024 Freightliner FS 65 Chassis Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Freightliner FS 65 Chassis is 10x285.75. It has a center bore of 220 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2024 Freightliner FS 65 Chassis Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Center Bore (Hub Bore) | 220 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2024 FS 65 Chassis — Year-Specific Fitment Context
The 2024 is the only model year of the Freightliner FS 65 Chassis in our database using the 10x285.75 bolt pattern.
2024 Freightliner FS 65 Chassis Wheel Interchange & Donor Fitment Guide (10x285.75)
The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2024 Freightliner FS 65 Chassis, donor rims must match the 10x285.75 PCD and have a center bore of at least 220 mm:
DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Freightliner MT 55 Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner MT-55 HHV Chassis (Hydraulic Hybrid Vehicle) | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner MT45 Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner MT45EV | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner OMC Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner RA Cascadia | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Freightliner NGE (956) Platform Truck COE | 221 mm | 221mm → 220mm |
Not Applicable |
| 2024 Freightliner S2 106 Bus Chassis | 221.1 mm | 221.1mm → 220mm |
Not Applicable |
| 2024 Volvo VAH | 221 mm | 221mm → 220mm |
Not Applicable |
| 2024 Volvo VHD | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Chevrolet 6500XD | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Freightliner EF Front Engine Bus Chassis | 221.1 mm | 221.1mm → 220mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Freightliner FS 65 Chassis — Frequently Asked Questions
What is the bolt pattern for a 2024 Freightliner FS 65 Chassis?
The 2024 Freightliner FS 65 Chassis uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220mm and the offset is Not Applicablemm.
Will wheels from another Freightliner fit my 2024 FS 65 Chassis?
Only if they share the exact same 10x285.75 bolt pattern, a compatible offset, and a center bore equal to or larger than 220mm.
What is the center bore of a 2024 Freightliner FS 65 Chassis?
The factory center bore (hub bore) for the 2024 Freightliner FS 65 Chassis is 220mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2024 Freightliner FS 65 Chassis?
Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2024 Freightliner FS 65 Chassis?
Absolutely. Just ensure the aftermarket wheels have a 10x285.75 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 220mm (using hub rings if larger).
Do 2024 Freightliner FS 65 Chassiss use lug bolts or lug nuts?
The 2024 FS 65 Chassis requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →