2026 Freightliner NGE (956) Platform Truck COE Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Freightliner NGE (956) Platform Truck COE is 10x285.75. It has a center bore of 221 mm, an offset range of Not Applicable, and utilizes M22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2026 Freightliner NGE (956) Platform Truck COE Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Center Bore (Hub Bore) | 221 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | M22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2026 NGE (956) Platform Truck COE — Year-Specific Fitment Context
The 2026 model year is the final year of the Freightliner NGE (956) Platform Truck COE's 10x285.75 bolt pattern run (since 2024). Wheels from any 2024–2026 Freightliner NGE (956) Platform Truck COE are cross-compatible with the 2026 model.
Freightliner NGE (956) Platform Truck COE Bolt Pattern by Year
Looking for all generations? View the complete Freightliner NGE (956) Platform Truck COE (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the NGE (956) Platform Truck COE's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Freightliner NGE (956) Platform Truck COE Wheel Interchange & Donor Fitment Guide (10x285.75)
The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2026 Freightliner NGE (956) Platform Truck COE, donor rims must match the 10x285.75 PCD and have a center bore of at least 221 mm:
DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 221mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Volvo VAH | 221 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner EF Front Engine Bus Chassis | 221.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner S2 106 Bus Chassis | 221.1 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Volvo VHD | 222 mm | 222mm → 221mm |
Not Applicable |
| 2024 Chevrolet 6500XD | 222 mm | 222mm → 221mm |
Not Applicable |
| 2024 Freightliner EFX Front Engine Bus Chassis | 222 mm | 222mm → 221mm |
Not Applicable |
| 2024 Freightliner MD109 | 222 mm | 222mm → 221mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Freightliner NGE (956) Platform Truck COE — Frequently Asked Questions
What is the bolt pattern for a 2026 Freightliner NGE (956) Platform Truck COE?
The 2026 Freightliner NGE (956) Platform Truck COE uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 221mm and the offset is Not Applicablemm.
What other years of Freightliner NGE (956) Platform Truck COE have the same bolt pattern as the 2026?
The Freightliner NGE (956) Platform Truck COE uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2026 Freightliner NGE (956) Platform Truck COE?
Refer to your owner's manual for exact specs, but always tighten the M22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2026 Freightliner NGE (956) Platform Truck COE use?
The 2026 Freightliner NGE (956) Platform Truck COE uses M22x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2026 Freightliner NGE (956) Platform Truck COE?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 NGE (956) Platform Truck COE, the PCD is 10x285.75.
How do I measure the bolt pattern on my 2026 Freightliner?
The 2026 NGE (956) Platform Truck COE uses a 10x285.75 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →