2007 GMC Sierra (Classic) 1500 Regular Cab Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 GMC Sierra (Classic) 1500 Regular Cab, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 6x139.7 (6x5.5")
Lug Nut / Bolt Size 14x1.5
Center Bore (CB) 78.1 mm
Offset (ET) 20-30
Torque Specs 100 ft-lbs (135 Nm)

2007 Sierra (Classic) 1500 Regular Cab — Year-Specific Fitment Context

The 2007 is the only model year of the GMC Sierra (Classic) 1500 Regular Cab in our database using the 6x139.7 bolt pattern.

Fitment Notes

The 2007 GMC Sierra (Classic) 1500 Regular Cab has a bolt pattern of 6x139.7.

Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".

This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, GMC Sierra (Classic) 1500 Regular Cab appears from 2007 to 2007 (1 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

6x139.7 Pattern Context

This bolt pattern appears on 1067 vehicles in our current database and is considered common.

Examples of other vehicles using 6x139.7:

2007 GMC Sierra (Classic) 1500 Regular Cab — Frequently Asked Questions

What is the bolt pattern for a 2007 GMC Sierra (Classic) 1500 Regular Cab?

The 2007 GMC Sierra (Classic) 1500 Regular Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 20-30mm.

What is the center bore of a 2007 GMC Sierra (Classic) 1500 Regular Cab?

The factory center bore (hub bore) for the 2007 GMC Sierra (Classic) 1500 Regular Cab is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

Do 2007 GMC Sierra (Classic) 1500 Regular Cabs use lug bolts or lug nuts?

The 2007 Sierra (Classic) 1500 Regular Cab requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

What is the PCD for a 2007 GMC Sierra (Classic) 1500 Regular Cab?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 Sierra (Classic) 1500 Regular Cab, the PCD is 6x139.7.

What is the factory wheel offset for a 2007 GMC Sierra (Classic) 1500 Regular Cab?

The OEM offset for the 2007 Sierra (Classic) 1500 Regular Cab is typically around 20-30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

What lug nut size does the 2007 GMC Sierra (Classic) 1500 Regular Cab use?

The 2007 GMC Sierra (Classic) 1500 Regular Cab uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

GMC Sierra (Classic) 1500 Regular Cab is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2007 GMC Sierra (Classic) 1500 Regular Cab, please report it via our About page contact so we can verify and update this record.

Other GMC Models

2500 Crew Cab 2500 Regular Cab Acadia Limited Envoy XL Envoy XUV Jimmy Rally Wagon 2500 Rally Wagon 3500 Savana 1500 Passenger Savana 3500 Cargo Sierra (Classic) 1500 Regular Cab Sierra 1500 Crew Cab Sierra 1500 Limited Double Cab Sierra 2500 Extended Cab Sierra 2500 HD Crew Cab Sierra 2500 HD Regular Cab Sierra 2500 Regular Cab Sierra EV Sonoma Club Cab Sonoma Club Coupe Cab