2025 Toyota Tacoma Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Toyota Tacoma is 6x139.7 (6x5.5"). It has a center bore of 95.1 mm, an offset range of 25-35, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 83 ft-lbs (113 Nm).

2025 Toyota Tacoma Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 6x139.7 (6x5.5")
Center Bore (Hub Bore) 95.1 mm
Offset Range (ET) 25-35
Thread Size (Lug Nut / Bolt) 14x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 83 ft-lbs (113 Nm)
💡

Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2025 Tacoma — Year-Specific Fitment Context

The 2025 Toyota Tacoma is in year 2 of 3 using the 6x139.7 pattern (2024–2026). Wheels from any 2024–2026 Toyota Tacoma are cross-compatible with the 2025 model.

Toyota Tacoma Bolt Pattern by Year

Looking for all generations? View the complete Toyota Tacoma (2024–2026) Bolt Pattern & Generation Guide →

The table below shows how the Tacoma's wheel specifications have changed over the years. The 2025 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2024 6x139.7 95.1 25-35
▸ 2025 6x139.7 95.1 25-35
2026 6x139.7 95.1 25-35

2025 Toyota Tacoma Wheel Interchange & Donor Fitment Guide (6x139.7)

The 6x139.7 bolt pattern is shared by 1102 vehicles in our database (common). For safe wheel swaps on the 2025 Toyota Tacoma, donor rims must match the 6x139.7 PCD and have a center bore of at least 95.1 mm:

DIRECT HUB MATCH Same 6x139.7 Pattern & Exact 95.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2022 Lexus LX 95.1 mm (Exact) 60 14x1.5 (Flat/Mag)
2025 Toyota 4Runner 95.1 mm (Exact) 15-25 14x1.5 (Flat)
2024 Toyota Land Cruiser 95.1 mm (Exact) 60 14x1.5 (Flat/Mag)
2023 Toyota Sequoia 95.1 mm (Exact) 25 14x1.5 (Flat/Mag)
2025 Toyota Tundra 95.1 mm (Exact) 60 14x1.5 (Flat)
2022 Toyota Tundra CrewMax 95.1 mm (Exact) 60 14x1.5 (Flat/Mag)

HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2025 Isuzu NPR 110 mm 110mm → 95.1mm Not Applicable
2025 Isuzu NPR-HD 110 mm 110mm → 95.1mm Not Applicable
2008 Lexus GX 106.1 mm 106.1mm → 95.1mm 25
2006 Nissan Armada 110.1 mm 110.1mm → 95.1mm 24
1994 Nissan Pathfinder 110.0 mm 110.0mm → 95.1mm 40
2007 Nissan Titan Crew Cab 110.1 mm 110.1mm → 95.1mm 25
Looking for all models? View the complete directory of vehicles with 6x139.7 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2025 Toyota Tacoma — Frequently Asked Questions

What is the bolt pattern for a 2025 Toyota Tacoma?

The 2025 Toyota Tacoma uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 95.1mm and the offset is 25-35mm.

What other years of Toyota Tacoma have the same bolt pattern as the 2025?

The Toyota Tacoma uses the 6x139.7 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.

Why is matching the 95.1mm center bore important for the 2025 Tacoma?

The 95.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.

How tight should I torque the lug nuts on a 2025 Toyota Tacoma?

Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

Can I put aftermarket wheels on my 2025 Toyota Tacoma?

Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 25-35mm, and a center bore of at least 95.1mm (using hub rings if larger).

Can I use spacers on my 2025 Toyota Tacoma?

Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 95.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Toyota Tacoma By Year

2024 2025 2026

Other Toyota Models

4Runner C-HR Camry Hybrid Celica Corolla Hybrid Grand Highlander Hybrid Highlander Hybrid Matrix Paseo Prius Prime (PHEV) RAV4 Regular Cab Sequoia Sienna Solara Supra Tacoma Access Cab Tacoma Double Cab Tundra Double Cab Tundra Hybrid CrewMax

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)