2024 Toyota Tacoma Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Toyota Tacoma is 6x139.7 (6x5.5"). It has a center bore of 95.1 mm, an offset range of 25-35, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 83 ft-lbs (113 Nm).
2024 Toyota Tacoma Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Center Bore (Hub Bore) | 95.1 mm |
| Offset Range (ET) | 25-35 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 83 ft-lbs (113 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2024 Tacoma — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Toyota Tacoma's 6x139.7 bolt pattern era, which continued through 2026 (3 consecutive years). Wheels from any 2024–2026 Toyota Tacoma are cross-compatible with the 2024 model.
Toyota Tacoma Bolt Pattern by Year
Looking for all generations? View the complete Toyota Tacoma (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Tacoma's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 Toyota Tacoma Wheel Interchange & Donor Fitment Guide (6x139.7)
The 6x139.7 bolt pattern is shared by 1102 vehicles in our database (common). For safe wheel swaps on the 2024 Toyota Tacoma, donor rims must match the 6x139.7 PCD and have a center bore of at least 95.1 mm:
DIRECT HUB MATCH Same 6x139.7 Pattern & Exact 95.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2022 Toyota Tundra CrewMax | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
| 2022 Toyota Tundra Double Cab | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
| 2024 Toyota Tundra Hybrid CrewMax | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
| 2022 Lexus LX | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
| 2025 Toyota 4Runner | 95.1 mm (Exact) | 15-25 | 14x1.5 (Flat) |
| 2024 Toyota Land Cruiser | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Isuzu NPR | 110 mm | 110mm → 95.1mm |
Not Applicable |
| 2025 Isuzu NPR-HD | 110 mm | 110mm → 95.1mm |
Not Applicable |
| 2008 Lexus GX | 106.1 mm | 106.1mm → 95.1mm |
25 |
| 2006 Nissan Armada | 110.1 mm | 110.1mm → 95.1mm |
24 |
| 1994 Nissan Pathfinder | 110.0 mm | 110.0mm → 95.1mm |
40 |
| 2007 Nissan Titan Crew Cab | 110.1 mm | 110.1mm → 95.1mm |
25 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 83 ft-lbs (113 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Toyota Tacoma — Frequently Asked Questions
What is the bolt pattern for a 2024 Toyota Tacoma?
The 2024 Toyota Tacoma uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 95.1mm and the offset is 25-35mm.
What other years of Toyota Tacoma have the same bolt pattern as the 2024?
The Toyota Tacoma uses the 6x139.7 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2024 Toyota Tacoma?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 25-35mm, and a center bore of at least 95.1mm (using hub rings if larger).
Why is matching the 95.1mm center bore important for the 2024 Tacoma?
The 95.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 2024 Toyota?
The 2024 Tacoma uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2024 Toyota Tacoma?
The factory center bore (hub bore) for the 2024 Toyota Tacoma is 95.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →