2024 Toyota Land Cruiser Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Toyota Land Cruiser is 6x139.7 (6x5.5"). It has a center bore of 95.1 mm, an offset range of 60, and utilizes 14x1.5 (Flat/Mag seat, 21mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2024 Toyota Land Cruiser Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Center Bore (Hub Bore) | 95.1 mm |
| Offset Range (ET) | 60 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2024 Land Cruiser — Year-Specific Fitment Context
The 2024 Toyota Land Cruiser is in year 33 of 34 using the 6x139.7 pattern (1992–2025). Wheels from any 1992–2025 Toyota Land Cruiser are cross-compatible with the 2024 model. Across its full production run (1992–2025), the Land Cruiser has also used: 5x150.
Toyota Land Cruiser Bolt Pattern by Year
The table below shows how the Land Cruiser's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 106.1 | 0 |
| 1993 | 6x139.7 | 106.1 | 0 |
| 1994 | 6x139.7 | 106.1 | 0 |
| 1995 | 6x139.7 | 106.1 | 0 |
| 1996 | 6x139.7 | 106.1 | 0 |
| 1997 | 6x139.7 | 106.1 | 0 |
| 1998 | 5x150 | 110.1 | 60 |
| 1999 | 5x150 | 110.1 | 60 |
| 2000 | 5x150 | 110.1 | 60 |
| 2001 | 5x150 | 110.1 | 60 |
| 2002 | 5x150 | 110.1 | 60 |
| 2003 | 5x150 | 110.1 | 60 |
| 2004 | 5x150 | 110.1 | 60 |
| 2005 | 6x139.7 | 106.1 | 18 |
| 2006 | 6x139.7 | 106.1 | 18 |
| 2007 | 6x139.7 | 106.1 | 18 |
| 2008 | 6x139.7 | 106.1 | 18 |
| 2009 | 6x139.7 | 106.1 | 18 |
| 2010 | 6x139.7 | 106.1 | 18 |
| 2011 | 6x139.7 | 106.1 | 18 |
| 2013 | 6x139.7 | 106.1 | 18 |
| 2014 | 6x139.7 | 106.1 | 18 |
| 2015 | 6x139.7 | 106.1 | 18 |
| 2016 | 5x150 | 110.1 | 60 |
| 2017 | 5x150 | 110.1 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| ▸ 2024 | 6x139.7 | 95.1 | 60 |
| 2025 | 6x139.7 | 95.1 | 60 |
2024 Toyota Land Cruiser Wheel Interchange & Donor Fitment Guide (6x139.7)
The 6x139.7 bolt pattern is shared by 1069 vehicles in our database (common). For safe wheel swaps on the 2024 Toyota Land Cruiser, donor rims must match the 6x139.7 PCD and have a center bore of at least 95.1 mm:
HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2004 GMC Canyon Crew Cab | 100.3 mm | 100.3mm → 95.1mm |
33 |
| 2004 GMC Canyon Extended Cab | 100.3 mm | 100.3mm → 95.1mm |
33 |
| 2004 GMC Canyon Regular Cab | 100.3 mm | 100.3mm → 95.1mm |
33 |
| 2006 HUMMER H3 | 100 mm | 100mm → 95.1mm |
20 |
| 2009 HUMMER H3T | 100 mm | 100mm → 95.1mm |
20 |
| 1992 Isuzu Amigo | 100.1 mm | 100.1mm → 95.1mm |
38 |
Expert Buying Guide for 2024 Toyota Land Cruiser
For the 2024 Toyota Land Cruiser, the 5x150 bolt pattern and 110.1mm center bore are critical. Aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 60mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use lug nuts with the correct 14x1.5 thread pitch and a 60-degree conical seat (ball seat is not compatible). Re-torque after 50-100 miles. Note: 1998-2024 Land Cruiser wheels are interchangeable, but earlier models (1992-1997) use 6x139.7.
Historical Fitment Data Reference
In our dataset, Toyota Land Cruiser appears from 1992 to 2025 (31 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 60.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings if aftermarket wheels have a bore larger than 110.1mm to avoid vibrations.
- ✅ Stick within 50-70mm offset; lower offsets may rub fenders, higher offsets may contact suspension.
- ✅ Re-torque lug nuts to 97 ft-lb after 50 miles; never use impact wrenches for final tightening.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2024 Toyota Land Cruiser — Frequently Asked Questions
What is the bolt pattern for a 2024 Toyota Land Cruiser?
The 2024 Toyota Land Cruiser uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 95.1mm and the offset is 60mm.
What other years of Toyota Land Cruiser have the same bolt pattern as the 2024?
The Toyota Land Cruiser uses the 6x139.7 pattern from 1992 through 2025. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What does 60mm offset mean for the 2024 Land Cruiser?
An offset of 60mm means the wheel's mounting surface is 60mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
How do I measure the bolt pattern on my 2024 Toyota?
The 2024 Land Cruiser uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2024 Toyota Land Cruiser?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 60mm, and a center bore of at least 95.1mm (using hub rings if larger).
What is the PCD for a 2024 Toyota Land Cruiser?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Land Cruiser, the PCD is 6x139.7.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →