2006 Toyota Land Cruiser Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Toyota Land Cruiser, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 18 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2006 Land Cruiser — Year-Specific Fitment Context
The 2006 Toyota Land Cruiser is in year 15 of 24 using the 6x139.7 pattern (1992–2015). Wheels from any 1992–2015 Toyota Land Cruiser are cross-compatible with the 2006 model. Across its full production run (1992–2024), the Land Cruiser has also used: 5x150.
Toyota Land Cruiser Bolt Pattern by Year
The table below shows how the Land Cruiser's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 106.1 | 0 |
| 1993 | 6x139.7 | 106.1 | 0 |
| 1994 | 6x139.7 | 106.1 | 0 |
| 1995 | 6x139.7 | 106.1 | 0 |
| 1996 | 6x139.7 | 106.1 | 0 |
| 1997 | 6x139.7 | 106.1 | 0 |
| 1998 | 5x150 | 110.1 | 60 |
| 1999 | 5x150 | 110.1 | 60 |
| 2000 | 5x150 | 110.1 | 60 |
| 2001 | 5x150 | 110.1 | 60 |
| 2002 | 5x150 | 110.1 | 60 |
| 2003 | 5x150 | 110.1 | 60 |
| 2004 | 5x150 | 110.1 | 60 |
| 2005 | 6x139.7 | 106.1 | 18 |
| ▸ 2006 | 6x139.7 | 106.1 | 18 |
| 2007 | 6x139.7 | 106.1 | 18 |
| 2008 | 6x139.7 | 106.1 | 18 |
| 2009 | 6x139.7 | 106.1 | 18 |
| 2010 | 6x139.7 | 106.1 | 18 |
| 2011 | 6x139.7 | 106.1 | 18 |
| 2013 | 6x139.7 | 106.1 | 18 |
| 2014 | 6x139.7 | 106.1 | 18 |
| 2015 | 6x139.7 | 106.1 | 18 |
| 2016 | 5x150 | 110.1 | 60 |
| 2017 | 5x150 | 110.1 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2024 | 5x150 | 110.1 | 60 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2006 Toyota Land Cruiser
For your 2006 Toyota Land Cruiser, the 6x139.7 bolt pattern is shared with 1992–2015 models, offering wide cross-compatibility. However, the 106.1mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 18mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the 12x1.50 thread pitch requires correct nuts—use conical (60-degree) seat nuts for aftermarket wheels, as factory wheels use a ball seat. Mismatched seating can lead to loose wheels. Safety first: improper fitment compromises handling and risks wheel detachment.
Historical Fitment Data Reference
In our dataset, Toyota Land Cruiser appears from 1992 to 2024 (30 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 60.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to maintain clamping force.
- ✅ When using aftermarket wheels, always install hub-centric rings to match the 106.1mm bore.
- ✅ Avoid spacers without extended studs; the factory studs are short and may not provide sufficient thread engagement.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Toyota Land Cruiser — Frequently Asked Questions
What is the bolt pattern for a 2006 Toyota Land Cruiser?
The 2006 Toyota Land Cruiser uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 18mm.
What other years of Toyota Land Cruiser have the same bolt pattern as the 2006?
The Toyota Land Cruiser uses the 6x139.7 pattern from 1992 through 2015. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Will wheels from another Toyota fit my 2006 Land Cruiser?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 106.1mm.
What is the factory wheel offset for a 2006 Toyota Land Cruiser?
The OEM offset for the 2006 Land Cruiser is typically around 18mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2006 Toyota Land Cruiser use?
The 2006 Toyota Land Cruiser uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 106.1mm center bore important for the 2006 Land Cruiser?
The 106.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset