2024 Toyota Tacoma XtraCab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Toyota Tacoma XtraCab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 25-30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2024 Tacoma XtraCab — Year-Specific Fitment Context
The 2024 is the only model year of the Toyota Tacoma XtraCab in our database using the 6x139.7 bolt pattern.
Fitment Notes
The 2024 Toyota Tacoma XtraCab has a bolt pattern of 6x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".
This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota Tacoma XtraCab appears from 2024 to 2024 (1 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 55.0 mm
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
2024 Toyota Tacoma XtraCab — Frequently Asked Questions
What is the bolt pattern for a 2024 Toyota Tacoma XtraCab?
The 2024 Toyota Tacoma XtraCab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 25-30mm.
How do I measure the bolt pattern on my 2024 Toyota?
The 2024 Tacoma XtraCab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Toyota fit my 2024 Tacoma XtraCab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 106.1mm.
What lug nut size does the 2024 Toyota Tacoma XtraCab use?
The 2024 Toyota Tacoma XtraCab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2024 Toyota Tacoma XtraCab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2024 Toyota Tacoma XtraCab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 25-30mm, and a center bore of at least 106.1mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Toyota Tacoma XtraCab is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2024-2024 (1 model years).
- Observed bolt-pattern variants: 1 (6x139.7).
- Observed total offset span across years: 55.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2024 Toyota Tacoma XtraCab, please report it via our About page contact so we can verify and update this record.