2005 Toyota Tacoma Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2005 Toyota Tacoma Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 25-30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2005 Tacoma Regular Cab — Year-Specific Fitment Context
The 2005 model year marks the beginning of the Toyota Tacoma Regular Cab's 6x139.7 bolt pattern era, which continued through 2014 (10 consecutive years). Wheels from any 2005–2014 Toyota Tacoma Regular Cab are cross-compatible with the 2005 model. Note: the 2004 model used a different pattern (5x114.3), so its wheels are NOT interchangeable with the 2005. Across its full production run (1995–2014), the Tacoma Regular Cab has also used: 5x114.3.
Toyota Tacoma Regular Cab Bolt Pattern by Year
The table below shows how the Tacoma Regular Cab's wheel specifications have changed over the years. The 2005 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 60.1 | 40 |
| 1996 | 5x114.3 | 60.1 | 40 |
| 1997 | 5x114.3 | 60.1 | 40 |
| 1998 | 5x114.3 | 60.1 | 40 |
| 1999 | 5x114.3 | 60.1 | 40 |
| 2000 | 5x114.3 | 60.1 | 40 |
| 2001 | 5x114.3 | 60.1 | 40 |
| 2002 | 5x114.3 | 60.1 | 40 |
| 2003 | 5x114.3 | 60.1 | 40 |
| 2004 | 5x114.3 | 60.1 | 40 |
| ▸ 2005 | 6x139.7 | 106.1 | 25-30 |
| 2006 | 6x139.7 | 106.1 | 25-30 |
| 2007 | 6x139.7 | 106.1 | 25-30 |
| 2008 | 6x139.7 | 106.1 | 25-30 |
| 2009 | 6x139.7 | 106.1 | 25-30 |
| 2010 | 6x139.7 | 106.1 | 25-30 |
| 2011 | 6x139.7 | 106.1 | 25-30 |
| 2012 | 6x139.7 | 106.1 | 25-30 |
| 2013 | 6x139.7 | 106.1 | 25-30 |
| 2014 | 6x139.7 | 106.1 | 25-30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2005 Toyota Tacoma Regular Cab
When selecting wheels for a 2005 Toyota Tacoma Regular Cab, prioritize the 106.1mm center bore. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset must stay within 25-30mm; deviations risk rubbing on suspension or fenders. Always use lug nuts with 12x1.5 thread pitch and the correct seat type (conical/60-degree taper) to avoid loosening or wheel damage. Note: 2005-2014 Tacoma wheels are interchangeable, but 2004 and earlier models use a different bolt pattern (5x114.3) and are not compatible.
Historical Fitment Data Reference
In our dataset, Toyota Tacoma Regular Cab appears from 1995 to 2014 (20 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 70.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50 miles of driving.
- ✅ Verify hub-centric rings are corrosion-resistant (aluminum or plastic) and fit snugly.
- ✅ Check for caliper clearance when using wheels with offset near 25mm, especially with aftermarket brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2005 Toyota Tacoma Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2005 Toyota Tacoma Regular Cab?
The 2005 Toyota Tacoma Regular Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 25-30mm.
What other years of Toyota Tacoma Regular Cab have the same bolt pattern as the 2005?
The Toyota Tacoma Regular Cab uses the 6x139.7 pattern from 2005 through 2014. Wheels from any of these model years are dimensionally compatible with the 2005, provided the offset and center bore also match.
Can I use 2004 Toyota Tacoma Regular Cab wheels on a 2005?
No. The 2004 Tacoma Regular Cab used a 5x114.3 bolt pattern, which differs from the 2005's 6x139.7. They are not interchangeable.
What lug nut size does the 2005 Toyota Tacoma Regular Cab use?
The 2005 Toyota Tacoma Regular Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2005 Toyota Tacoma Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 25-30mm, and a center bore of at least 106.1mm (using hub rings if larger).
What is the factory wheel offset for a 2005 Toyota Tacoma Regular Cab?
The OEM offset for the 2005 Tacoma Regular Cab is typically around 25-30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset