2002 Toyota Tacoma Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Toyota Tacoma Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2002 Tacoma Regular Cab — Year-Specific Fitment Context
The 2002 Toyota Tacoma Regular Cab is in year 8 of 10 using the 5x114.3 pattern (1995–2004). Wheels from any 1995–2004 Toyota Tacoma Regular Cab are cross-compatible with the 2002 model. Across its full production run (1995–2014), the Tacoma Regular Cab has also used: 6x139.7.
Toyota Tacoma Regular Cab Bolt Pattern by Year
The table below shows how the Tacoma Regular Cab's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 60.1 | 40 |
| 1996 | 5x114.3 | 60.1 | 40 |
| 1997 | 5x114.3 | 60.1 | 40 |
| 1998 | 5x114.3 | 60.1 | 40 |
| 1999 | 5x114.3 | 60.1 | 40 |
| 2000 | 5x114.3 | 60.1 | 40 |
| 2001 | 5x114.3 | 60.1 | 40 |
| ▸ 2002 | 5x114.3 | 60.1 | 40 |
| 2003 | 5x114.3 | 60.1 | 40 |
| 2004 | 5x114.3 | 60.1 | 40 |
| 2005 | 6x139.7 | 106.1 | 25-30 |
| 2006 | 6x139.7 | 106.1 | 25-30 |
| 2007 | 6x139.7 | 106.1 | 25-30 |
| 2008 | 6x139.7 | 106.1 | 25-30 |
| 2009 | 6x139.7 | 106.1 | 25-30 |
| 2010 | 6x139.7 | 106.1 | 25-30 |
| 2011 | 6x139.7 | 106.1 | 25-30 |
| 2012 | 6x139.7 | 106.1 | 25-30 |
| 2013 | 6x139.7 | 106.1 | 25-30 |
| 2014 | 6x139.7 | 106.1 | 25-30 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2002 Toyota Tacoma Regular Cab
For your 2002 Toyota Tacoma Regular Cab, the bolt pattern is 5x114.3 with a center bore of 60.1mm. When selecting aftermarket wheels, ensure they have a center bore of at least 60.1mm or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is critical; the factory offset is around 40mm. Deviating significantly can cause clearance issues with suspension or fenders. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree taper). Using incorrect lug nuts can lead to wheel loosening or damage. For safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota Tacoma Regular Cab appears from 1995 to 2014 (20 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 70.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels with a center bore smaller than 60.1mm; hub-centric rings are mandatory for larger bores.
- ✅ Check offset carefully: +40mm is ideal; offsets outside +30 to +50mm may require fender rolling or spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Toyota Tacoma Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2002 Toyota Tacoma Regular Cab?
The 2002 Toyota Tacoma Regular Cab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40mm.
What other years of Toyota Tacoma Regular Cab have the same bolt pattern as the 2002?
The Toyota Tacoma Regular Cab uses the 5x114.3 pattern from 1995 through 2004. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
What lug nut size does the 2002 Toyota Tacoma Regular Cab use?
The 2002 Toyota Tacoma Regular Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2002 Toyota?
The 2002 Tacoma Regular Cab uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 60.1mm center bore important for the 2002 Tacoma Regular Cab?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2002 Toyota Tacoma Regular Cab?
The OEM offset for the 2002 Tacoma Regular Cab is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset