2007 Toyota Tacoma Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Toyota Tacoma Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 25-30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 Tacoma Regular Cab — Year-Specific Fitment Context
The 2007 Toyota Tacoma Regular Cab is in year 3 of 10 using the 6x139.7 pattern (2005–2014). Wheels from any 2005–2014 Toyota Tacoma Regular Cab are cross-compatible with the 2007 model. Across its full production run (1995–2014), the Tacoma Regular Cab has also used: 5x114.3.
Toyota Tacoma Regular Cab Bolt Pattern by Year
The table below shows how the Tacoma Regular Cab's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 60.1 | 40 |
| 1996 | 5x114.3 | 60.1 | 40 |
| 1997 | 5x114.3 | 60.1 | 40 |
| 1998 | 5x114.3 | 60.1 | 40 |
| 1999 | 5x114.3 | 60.1 | 40 |
| 2000 | 5x114.3 | 60.1 | 40 |
| 2001 | 5x114.3 | 60.1 | 40 |
| 2002 | 5x114.3 | 60.1 | 40 |
| 2003 | 5x114.3 | 60.1 | 40 |
| 2004 | 5x114.3 | 60.1 | 40 |
| 2005 | 6x139.7 | 106.1 | 25-30 |
| 2006 | 6x139.7 | 106.1 | 25-30 |
| ▸ 2007 | 6x139.7 | 106.1 | 25-30 |
| 2008 | 6x139.7 | 106.1 | 25-30 |
| 2009 | 6x139.7 | 106.1 | 25-30 |
| 2010 | 6x139.7 | 106.1 | 25-30 |
| 2011 | 6x139.7 | 106.1 | 25-30 |
| 2012 | 6x139.7 | 106.1 | 25-30 |
| 2013 | 6x139.7 | 106.1 | 25-30 |
| 2014 | 6x139.7 | 106.1 | 25-30 |
Fitment Notes
The 2007 Toyota Tacoma Regular Cab has a bolt pattern of 6x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".
This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota Tacoma Regular Cab appears from 1995 to 2014 (20 model years).
Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 70.0 mm
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
2007 Toyota Tacoma Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2007 Toyota Tacoma Regular Cab?
The 2007 Toyota Tacoma Regular Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 25-30mm.
What other years of Toyota Tacoma Regular Cab have the same bolt pattern as the 2007?
The Toyota Tacoma Regular Cab uses the 6x139.7 pattern from 2005 through 2014. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What lug nut size does the 2007 Toyota Tacoma Regular Cab use?
The 2007 Toyota Tacoma Regular Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2007 Toyota Tacoma Regular Cab?
The factory center bore (hub bore) for the 2007 Toyota Tacoma Regular Cab is 106.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2007 Toyota Tacoma Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2007 Toyota Tacoma Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 Tacoma Regular Cab, the PCD is 6x139.7.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Toyota Tacoma Regular Cab has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1995-2014 (20 model years).
- Observed bolt-pattern variants: 2 (5x114.3, 6x139.7).
- Observed total offset span across years: 70.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2007 Toyota Tacoma Regular Cab, please report it via our About page contact so we can verify and update this record.