2000 Toyota Tacoma Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Toyota Tacoma Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2000 Tacoma Regular Cab — Year-Specific Fitment Context
The 2000 Toyota Tacoma Regular Cab is in year 6 of 10 using the 5x114.3 pattern (1995–2004). Wheels from any 1995–2004 Toyota Tacoma Regular Cab are cross-compatible with the 2000 model. Across its full production run (1995–2014), the Tacoma Regular Cab has also used: 6x139.7.
Toyota Tacoma Regular Cab Bolt Pattern by Year
The table below shows how the Tacoma Regular Cab's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 60.1 | 40 |
| 1996 | 5x114.3 | 60.1 | 40 |
| 1997 | 5x114.3 | 60.1 | 40 |
| 1998 | 5x114.3 | 60.1 | 40 |
| 1999 | 5x114.3 | 60.1 | 40 |
| ▸ 2000 | 5x114.3 | 60.1 | 40 |
| 2001 | 5x114.3 | 60.1 | 40 |
| 2002 | 5x114.3 | 60.1 | 40 |
| 2003 | 5x114.3 | 60.1 | 40 |
| 2004 | 5x114.3 | 60.1 | 40 |
| 2005 | 6x139.7 | 106.1 | 25-30 |
| 2006 | 6x139.7 | 106.1 | 25-30 |
| 2007 | 6x139.7 | 106.1 | 25-30 |
| 2008 | 6x139.7 | 106.1 | 25-30 |
| 2009 | 6x139.7 | 106.1 | 25-30 |
| 2010 | 6x139.7 | 106.1 | 25-30 |
| 2011 | 6x139.7 | 106.1 | 25-30 |
| 2012 | 6x139.7 | 106.1 | 25-30 |
| 2013 | 6x139.7 | 106.1 | 25-30 |
| 2014 | 6x139.7 | 106.1 | 25-30 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2000 Toyota Tacoma Regular Cab
For your 2000 Toyota Tacoma Regular Cab, the 5x114.3 bolt pattern and 60.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The stock offset is 40mm; staying within ±10mm avoids rubbing or suspension interference. Always use lug nuts with the correct 12x1.5 thread pitch and a conical (60-degree) seat—ball-seat or shank-style nuts can loosen. Re-torque after 50-100 miles. Wheels from 1995-2004 Tacoma Regular Cabs are direct fit.
Historical Fitment Data Reference
In our dataset, Toyota Tacoma Regular Cab appears from 1995 to 2014 (20 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 70.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings if aftermarket wheels have a bore larger than 60.1mm to prevent vibration.
- ✅ Stick to offsets between 30mm and 50mm to avoid rubbing on the fender or suspension.
- ✅ Re-torque lug nuts to 83 ft-lbs after 50-100 miles; use only conical seat lug nuts (12x1.5).
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Toyota Tacoma Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2000 Toyota Tacoma Regular Cab?
The 2000 Toyota Tacoma Regular Cab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40mm.
What other years of Toyota Tacoma Regular Cab have the same bolt pattern as the 2000?
The Toyota Tacoma Regular Cab uses the 5x114.3 pattern from 1995 through 2004. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Do 2000 Toyota Tacoma Regular Cabs use lug bolts or lug nuts?
The 2000 Tacoma Regular Cab requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2000 Toyota Tacoma Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 Tacoma Regular Cab, the PCD is 5x114.3.
Can I put aftermarket wheels on my 2000 Toyota Tacoma Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 60.1mm (using hub rings if larger).
Will wheels from another Toyota fit my 2000 Tacoma Regular Cab?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset