2025 Mitsubishi Outlander Sport Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Mitsubishi Outlander Sport is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 38-46, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2025 Mitsubishi Outlander Sport Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 38-46 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Outlander Sport — Year-Specific Fitment Context
The 2025 Mitsubishi Outlander Sport is in year 15 of 16 using the 5x114.3 pattern (2011–2026). Wheels from any 2011–2026 Mitsubishi Outlander Sport are cross-compatible with the 2025 model.
Mitsubishi Outlander Sport Bolt Pattern by Year
Looking for all generations? View the complete Mitsubishi Outlander Sport (2011–2026) Bolt Pattern & Generation Guide →
The table below shows how the Outlander Sport's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2011 | 5x114.3 | 67.1 | 38 |
| 2012 | 5x114.3 | 67.1 | 38 |
| 2013 | 5x114.3 | 67.1 | 38 |
| 2014 | 5x114.3 | 67.1 | 38 |
| 2015 | 5x114.3 | 67.1 | 38 |
| 2016 | 5x114.3 | 67.1 | 38 |
| 2017 | 5x114.3 | 67.1 | 38 |
| 2018 | 5x114.3 | 67.1 | 38 |
| 2019 | 5x114.3 | 67.1 | 38-46 |
| 2020 | 5x114.3 | 67.1 | 38-46 |
| 2021 | 5x114.3 | 67.1 | 38-46 |
| 2022 | 5x114.3 | 67.1 | 38-46 |
| 2023 | 5x114.3 | 67.1 | 38-46 |
| 2024 | 5x114.3 | 67.1 | 38-46 |
| ▸ 2025 | 5x114.3 | 67.1 | 38-46 |
| 2026 | 5x114.3 | 67.1 | 38-46 |
2025 Mitsubishi Outlander Sport Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Mitsubishi Outlander Sport, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2020 Kia Optima | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2020 Kia Optima Hybrid | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2020 Kia Optima Plug-in Hybrid | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2018 Kia Rio | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2016 Kia Sedona | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 2025 Kia Seltos | 67.1 mm (Exact) | 45-50 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Lincoln Aviator | 70.5 mm | 70.5mm → 67.1mm |
50 |
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 67.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 67.1mm |
10 |
| 2018 Lotus Evora 400 | 68.1 mm | 68.1mm → 67.1mm |
52 front, 69 rear |
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 67.1mm |
50-60mm |
| 2021 Maserati Quattroporte | 78.1 mm | 78.1mm → 67.1mm |
45 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Mitsubishi Outlander Sport — Frequently Asked Questions
What is the bolt pattern for a 2025 Mitsubishi Outlander Sport?
The 2025 Mitsubishi Outlander Sport uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Outlander Sport have the same bolt pattern as the 2025?
The Mitsubishi Outlander Sport uses the 5x114.3 pattern from 2011 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2025 Mitsubishi Outlander Sport?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 38-46mm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the factory wheel offset for a 2025 Mitsubishi Outlander Sport?
The OEM offset for the 2025 Outlander Sport is typically around 38-46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2025 Mitsubishi Outlander Sport?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2025 Mitsubishi?
The 2025 Outlander Sport uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →