2026 Mitsubishi Outlander Sport Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Mitsubishi Outlander Sport is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 38-46, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2026 Mitsubishi Outlander Sport Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 38-46 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Outlander Sport — Year-Specific Fitment Context
The 2026 model year is the final year of the Mitsubishi Outlander Sport's 5x114.3 bolt pattern run (since 2011). Wheels from any 2011–2026 Mitsubishi Outlander Sport are cross-compatible with the 2026 model.
Mitsubishi Outlander Sport Bolt Pattern by Year
Looking for all generations? View the complete Mitsubishi Outlander Sport (2011–2026) Bolt Pattern & Generation Guide →
The table below shows how the Outlander Sport's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2011 | 5x114.3 | 67.1 | 38 |
| 2012 | 5x114.3 | 67.1 | 38 |
| 2013 | 5x114.3 | 67.1 | 38 |
| 2014 | 5x114.3 | 67.1 | 38 |
| 2015 | 5x114.3 | 67.1 | 38 |
| 2016 | 5x114.3 | 67.1 | 38 |
| 2017 | 5x114.3 | 67.1 | 38 |
| 2018 | 5x114.3 | 67.1 | 38 |
| 2019 | 5x114.3 | 67.1 | 38-46 |
| 2020 | 5x114.3 | 67.1 | 38-46 |
| 2021 | 5x114.3 | 67.1 | 38-46 |
| 2022 | 5x114.3 | 67.1 | 38-46 |
| 2023 | 5x114.3 | 67.1 | 38-46 |
| 2024 | 5x114.3 | 67.1 | 38-46 |
| 2025 | 5x114.3 | 67.1 | 38-46 |
| ▸ 2026 | 5x114.3 | 67.1 | 38-46 |
2026 Mitsubishi Outlander Sport Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Mitsubishi Outlander Sport, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Aston Martin DB11 | 67.1 mm (Exact) | 35-45mm | 14x1.5 (Ball) |
| 2008 Aston Martin Vantage | 67.1 mm (Exact) | 50 | B 14x2.00 (Cone) |
| 2010 Dodge Avenger | 67.1 mm (Exact) | 42 | N 12x1.50 (Cone) |
| 2000 Dodge Stratus | 67.1 mm (Exact) | 41 | N 12x1.50 (Cone) |
| 2025 Ferrari 12Cilindri | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2025 Ferrari 296 | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2003 Pontiac Grand Prix | 70.3 mm | 70.3mm → 67.1mm |
52 |
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 67.1mm |
12 |
| 2015 Aston Martin DB9 | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2016 Aston Martin DB9 GT | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2021 Aston Martin DBS Superleggera | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2025 Aston Martin DBX | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Mitsubishi Outlander Sport — Frequently Asked Questions
What is the bolt pattern for a 2026 Mitsubishi Outlander Sport?
The 2026 Mitsubishi Outlander Sport uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Outlander Sport have the same bolt pattern as the 2026?
The Mitsubishi Outlander Sport uses the 5x114.3 pattern from 2011 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Why is matching the 67.1mm center bore important for the 2026 Outlander Sport?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2026 Mitsubishi Outlander Sport?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
How tight should I torque the lug nuts on a 2026 Mitsubishi Outlander Sport?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2026 Mitsubishi Outlander Sport use?
The 2026 Mitsubishi Outlander Sport uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →