2010 Dodge Avenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Dodge Avenger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2010 Avenger — Year-Specific Fitment Context
The 2010 Dodge Avenger is in year 16 of 20 using the 5x114.3 pattern (1995–2014). Wheels from any 1995–2014 Dodge Avenger are cross-compatible with the 2010 model.
Dodge Avenger Bolt Pattern by Year
The table below shows how the Avenger's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 67.1 | 42 |
| 1996 | 5x114.3 | 67.1 | 42 |
| 1997 | 5x114.3 | 67.1 | 42 |
| 1998 | 5x114.3 | 67.1 | 42 |
| 1999 | 5x114.3 | 67.1 | 42 |
| 2000 | 5x114.3 | 67.1 | 42 |
| 2008 | 5x114.3 | 67.1 | 42 |
| 2009 | 5x114.3 | 67.1 | 42 |
| ▸ 2010 | 5x114.3 | 67.1 | 42 |
| 2011 | 5x114.3 | 67.1 | 42 |
| 2012 | 5x114.3 | 67.1 | 42 |
| 2013 | 5x114.3 | 67.1 | 42 |
| 2014 | 5x114.3 | 67.1 | 42 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2010 Dodge Avenger
For your 2010 Dodge Avenger, the bolt pattern is 5x114.3mm, but critical fitment details include a 67.1mm center bore and a recommended offset around 42mm. Aftermarket wheels often have a larger center bore, so hub-centric rings (67.1mm to 73.1mm or similar) are essential to prevent vibration and ensure proper load distribution. Offset sensitivity is high; deviating more than ±5mm from 42mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—conical (60-degree) seats are standard. Never use ball-seat lug nuts on conical-seat wheels, as this can lead to wheel loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Dodge Avenger appears from 1995 to 2014 (13 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings when installing aftermarket wheels to match the 67.1mm center bore.
- ✅ Stick to offsets between 35-45mm to avoid rubbing on the strut or fender.
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Dodge Avenger — Frequently Asked Questions
What is the bolt pattern for a 2010 Dodge Avenger?
The 2010 Dodge Avenger uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 42mm.
What other years of Dodge Avenger have the same bolt pattern as the 2010?
The Dodge Avenger uses the 5x114.3 pattern from 1995 through 2014. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the factory wheel offset for a 2010 Dodge Avenger?
The OEM offset for the 2010 Avenger is typically around 42mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2010 Dodge Avenger?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the PCD for a 2010 Dodge Avenger?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Avenger, the PCD is 5x114.3.
What is the center bore of a 2010 Dodge Avenger?
The factory center bore (hub bore) for the 2010 Dodge Avenger is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset