2007 Mitsubishi Lancer Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Mitsubishi Lancer, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2007 Lancer — Year-Specific Fitment Context
The 2007 model year marks the beginning of the Mitsubishi Lancer's 5x114.3 bolt pattern era, which continued through 2017 (11 consecutive years). Wheels from any 2007–2017 Mitsubishi Lancer are cross-compatible with the 2007 model. Note: the 2006 model used a different pattern (4x114.3), so its wheels are NOT interchangeable with the 2007. Across its full production run (2002–2017), the Lancer has also used: 4x100, 4x114.3.
Mitsubishi Lancer Bolt Pattern by Year
The table below shows how the Lancer's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2002 | 4x100 | 56.1 | 45 |
| 2003 | 4x100 | 56.1 | 45 |
| 2004 | 4x100 | 56.1 | 45 |
| 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 4x114.3 | 67.1 | 46 |
| ▸ 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 46 |
| 2009 | 5x114.3 | 67.1 | 46 |
| 2010 | 5x114.3 | 67.1 | 46 |
| 2011 | 5x114.3 | 67.1 | 46 |
| 2012 | 5x114.3 | 67.1 | 46 |
| 2013 | 5x114.3 | 67.1 | 46 |
| 2014 | 5x114.3 | 67.1 | 46 |
| 2015 | 5x114.3 | 67.1 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2007 Mitsubishi Lancer
When selecting aftermarket wheels for your 2007 Mitsubishi Lancer, the 5x114.3 bolt pattern is critical, but center bore and offset are equally important. The factory center bore is 67.1mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset should stay near the factory 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—factory uses conical (60-degree) seats. Using incorrect lug nuts can lead to wheel loosening. For safety, avoid ball-seat or shank-style nuts unless specified. Proper fitment ensures longevity and handling.
Historical Fitment Data Reference
In our dataset, Mitsubishi Lancer appears from 2002 to 2017 (16 model years). Across model years, this model appears with 3 bolt patterns (4x100, 4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 1.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel settling.
- ✅ If using aftermarket wheels, ensure hub-centric rings match the 67.1mm center bore exactly.
- ✅ Double-check that aftermarket wheels clear the brake calipers; some designs may require spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Mitsubishi Lancer — Frequently Asked Questions
What is the bolt pattern for a 2007 Mitsubishi Lancer?
The 2007 Mitsubishi Lancer uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Mitsubishi Lancer have the same bolt pattern as the 2007?
The Mitsubishi Lancer uses the 5x114.3 pattern from 2007 through 2017. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Can I use 2006 Mitsubishi Lancer wheels on a 2007?
No. The 2006 Lancer used a 4x114.3 bolt pattern, which differs from the 2007's 5x114.3. They are not interchangeable.
What is the center bore of a 2007 Mitsubishi Lancer?
The factory center bore (hub bore) for the 2007 Mitsubishi Lancer is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2007 Mitsubishi?
The 2007 Lancer uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2007 Mitsubishi Lancer?
The OEM offset for the 2007 Lancer is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset