2002 Mitsubishi Lancer Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Mitsubishi Lancer, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2002 Lancer — Year-Specific Fitment Context
The 2002 model year marks the beginning of the Mitsubishi Lancer's 4x100 bolt pattern era, which continued through 2004 (3 consecutive years). Wheels from any 2002–2004 Mitsubishi Lancer are cross-compatible with the 2002 model. Across its full production run (2002–2017), the Lancer has also used: 4x114.3, 5x114.3.
Mitsubishi Lancer Bolt Pattern by Year
The table below shows how the Lancer's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2002 | 4x100 | 56.1 | 45 |
| 2003 | 4x100 | 56.1 | 45 |
| 2004 | 4x100 | 56.1 | 45 |
| 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 4x114.3 | 67.1 | 46 |
| 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 46 |
| 2009 | 5x114.3 | 67.1 | 46 |
| 2010 | 5x114.3 | 67.1 | 46 |
| 2011 | 5x114.3 | 67.1 | 46 |
| 2012 | 5x114.3 | 67.1 | 46 |
| 2013 | 5x114.3 | 67.1 | 46 |
| 2014 | 5x114.3 | 67.1 | 46 |
| 2015 | 5x114.3 | 67.1 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2002 Mitsubishi Lancer
For your 2002 Mitsubishi Lancer, the bolt pattern is 4x100 with a center bore of 56.1mm. When selecting aftermarket wheels, ensure they have a larger center bore and use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the thread pitch is M12x1.5, and the seat type is conical (60-degree taper). Using incorrect lug nuts can lead to wheel detachment. For safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Mitsubishi Lancer appears from 2002 to 2017 (16 model years). Across model years, this model appears with 3 bolt patterns (4x100, 4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 1.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 56.1mm to avoid vibrations.
- ✅ Stick to offsets between 40-50mm to prevent rubbing on suspension or fenders.
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of initial installation.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Mitsubishi Lancer — Frequently Asked Questions
What is the bolt pattern for a 2002 Mitsubishi Lancer?
The 2002 Mitsubishi Lancer uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 45mm.
What other years of Mitsubishi Lancer have the same bolt pattern as the 2002?
The Mitsubishi Lancer uses the 4x100 pattern from 2002 through 2004. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
What is the factory wheel offset for a 2002 Mitsubishi Lancer?
The OEM offset for the 2002 Lancer is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2002 Mitsubishi Lancer?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2002 Mitsubishi?
The 2002 Lancer uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 45mm offset mean for the 2002 Lancer?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mitsubishi.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset