2013 smart fortwo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 smart fortwo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 38 front, 36 rear |
| Torque Specs | 80 ft-lbs (108 Nm) |
2013 fortwo — Year-Specific Fitment Context
The 2013 model year marks the beginning of the smart fortwo's 4x100 bolt pattern era, which continued through 2017 (5 consecutive years). Wheels from any 2013–2017 smart fortwo are cross-compatible with the 2013 model. Note: the 2012 model used a different pattern (3x112), so its wheels are NOT interchangeable with the 2013. Across its full production run (2008–2017), the fortwo has also used: 3x112.
smart fortwo Bolt Pattern by Year
The table below shows how the fortwo's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2008 | 3x112 | 57.1 | 24 front, 22 rear |
| 2009 | 3x112 | 57.1 | 24 front, 22 rear |
| 2010 | 3x112 | 57.1 | 24 front, 22 rear |
| 2011 | 3x112 | 57.1 | 24 front, 22 rear |
| 2012 | 3x112 | 57.1 | 24 front, 22 rear |
| ▸ 2013 | 4x100 | 60.1 | 38 front, 36 rear |
| 2014 | 4x100 | 60.1 | 38 front, 36 rear |
| 2015 | 4x100 | 60.1 | 38 front, 36 rear |
| 2016 | 4x100 | 60.1 | 38 front, 36 rear |
| 2017 | 4x100 | 60.1 | 38 front, 36 rear |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2013 smart fortwo
For the 2013 smart fortwo, the bolt pattern is 4x100 with a 60.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. The offset range is 38mm front and 36mm rear; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/ball seat) to avoid wheel loosening. Verify that aftermarket wheels have sufficient brake caliper clearance. Cross-compatible wheels from 2013–2017 smart fortwo models fit directly, but 2012 and earlier (3x112) wheels are incompatible.
Historical Fitment Data Reference
In our dataset, smart fortwo appears from 2008 to 2017 (10 model years). Across model years, this model appears with 2 bolt patterns (3x112, 4x100).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 16.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 Nm after 50 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 60.1mm without hub-centric rings; vibrations may occur.
- ✅ Check offset carefully: front offset should be near 38mm, rear near 36mm; wider offsets may require spacers or fender rolling.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 smart fortwo — Frequently Asked Questions
What is the bolt pattern for a 2013 smart fortwo?
The 2013 smart fortwo uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 38 front, 36 rearmm.
What other years of smart fortwo have the same bolt pattern as the 2013?
The smart fortwo uses the 4x100 pattern from 2013 through 2017. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Can I use 2012 smart fortwo wheels on a 2013?
No. The 2012 fortwo used a 3x112 bolt pattern, which differs from the 2013's 4x100. They are not interchangeable.
Will wheels from another smart fit my 2013 fortwo?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
How tight should I torque the lug nuts on a 2013 smart fortwo?
Refer to your owner's manual for exact specs, but always tighten the B 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2013 smart fortwo?
The factory center bore (hub bore) for the 2013 smart fortwo is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset