2008 smart fortwo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 smart fortwo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 3x112 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 24 front, 22 rear |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 fortwo — Year-Specific Fitment Context
The 2008 model year marks the beginning of the smart fortwo's 3x112 bolt pattern era, which continued through 2012 (5 consecutive years). Wheels from any 2008–2012 smart fortwo are cross-compatible with the 2008 model. Across its full production run (2008–2017), the fortwo has also used: 4x100.
smart fortwo Bolt Pattern by Year
The table below shows how the fortwo's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2008 | 3x112 | 57.1 | 24 front, 22 rear |
| 2009 | 3x112 | 57.1 | 24 front, 22 rear |
| 2010 | 3x112 | 57.1 | 24 front, 22 rear |
| 2011 | 3x112 | 57.1 | 24 front, 22 rear |
| 2012 | 3x112 | 57.1 | 24 front, 22 rear |
| 2013 | 4x100 | 60.1 | 38 front, 36 rear |
| 2014 | 4x100 | 60.1 | 38 front, 36 rear |
| 2015 | 4x100 | 60.1 | 38 front, 36 rear |
| 2016 | 4x100 | 60.1 | 38 front, 36 rear |
| 2017 | 4x100 | 60.1 | 38 front, 36 rear |
3x112 Pattern Context
This bolt pattern appears on 16 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 3x112:
Expert Buying Guide for 2008 smart fortwo
For the 2008 smart fortwo, the 3x112 bolt pattern and 57.1mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is tight: 24mm front, 22mm rear. Sticking close to these offsets maintains handling and prevents rubbing. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (ball seat for OEM, cone seat for many aftermarket). Mixing seat types can cause wheel loosening. Verify lug nut length to ensure adequate thread engagement—at least 6-8 full turns. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, smart fortwo appears from 2008 to 2017 (10 model years). Across model years, this model appears with 2 bolt patterns (3x112, 4x100).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 16.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 57.1mm to avoid vibrations.
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to account for settling.
- ✅ Double-check that aftermarket wheels have a ball seat or cone seat matching your lug nuts; mismatched seats can lead to wheel failure.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 smart fortwo — Frequently Asked Questions
What is the bolt pattern for a 2008 smart fortwo?
The 2008 smart fortwo uses a 3x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 24 front, 22 rearmm.
What other years of smart fortwo have the same bolt pattern as the 2008?
The smart fortwo uses the 3x112 pattern from 2008 through 2012. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the PCD for a 2008 smart fortwo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 fortwo, the PCD is 3x112.
Will wheels from another smart fit my 2008 fortwo?
Only if they share the exact same 3x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
What is the factory wheel offset for a 2008 smart fortwo?
The OEM offset for the 2008 fortwo is typically around 24 front, 22 rearmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2008 smart?
The 2008 fortwo uses a 3x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset