2019 smart fortwo EQ coupe Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 smart fortwo EQ coupe, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 3x112 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 20-30mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2019 fortwo EQ coupe — Year-Specific Fitment Context
The 2019 is the only model year of the smart fortwo EQ coupe in our database using the 3x112 bolt pattern.
3x112 Pattern Context
This bolt pattern appears on 16 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 3x112:
Expert Buying Guide for 2019 smart fortwo EQ coupe
For the 2019 smart fortwo EQ coupe, the bolt pattern is 3x112 with a critical center bore of 57.1mm. Aftermarket wheels must be hub-centric; use hub-centric rings to avoid vibration. Offset range is 20-30mm; staying within this ensures proper clearance and handling. Lug nuts are M12x1.5 with a cone seat—never use ball-seat nuts. Always torque to manufacturer specs and re-torque after 50 miles. Mismatched center bore or offset can cause wheel separation or damage.
Historical Fitment Data Reference
In our dataset, smart fortwo EQ coupe appears from 2019 to 2019 (1 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 50.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to prevent loosening.
- ✅ Verify wheel hub bore matches 57.1mm; use rings if larger.
- ✅ Avoid spacers; they alter offset and may cause rubbing or instability.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 smart fortwo EQ coupe — Frequently Asked Questions
What is the bolt pattern for a 2019 smart fortwo EQ coupe?
The 2019 smart fortwo EQ coupe uses a 3x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 20-30mmmm.
Can I put aftermarket wheels on my 2019 smart fortwo EQ coupe?
Absolutely. Just ensure the aftermarket wheels have a 3x112 bolt pattern, an offset near 20-30mmmm, and a center bore of at least 57.1mm (using hub rings if larger).
What is the center bore of a 2019 smart fortwo EQ coupe?
The factory center bore (hub bore) for the 2019 smart fortwo EQ coupe is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2019 smart fortwo EQ coupe?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2019 smart?
The 2019 fortwo EQ coupe uses a 3x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another smart fit my 2019 fortwo EQ coupe?
Only if they share the exact same 3x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset