2010 smart fortwo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 smart fortwo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 3x112 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 24 front, 22 rear |
| Torque Specs | 80 ft-lbs (108 Nm) |
2010 fortwo — Year-Specific Fitment Context
The 2010 smart fortwo is in year 3 of 5 using the 3x112 pattern (2008–2012). Wheels from any 2008–2012 smart fortwo are cross-compatible with the 2010 model. Across its full production run (2008–2017), the fortwo has also used: 4x100.
smart fortwo Bolt Pattern by Year
The table below shows how the fortwo's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2008 | 3x112 | 57.1 | 24 front, 22 rear |
| 2009 | 3x112 | 57.1 | 24 front, 22 rear |
| ▸ 2010 | 3x112 | 57.1 | 24 front, 22 rear |
| 2011 | 3x112 | 57.1 | 24 front, 22 rear |
| 2012 | 3x112 | 57.1 | 24 front, 22 rear |
| 2013 | 4x100 | 60.1 | 38 front, 36 rear |
| 2014 | 4x100 | 60.1 | 38 front, 36 rear |
| 2015 | 4x100 | 60.1 | 38 front, 36 rear |
| 2016 | 4x100 | 60.1 | 38 front, 36 rear |
| 2017 | 4x100 | 60.1 | 38 front, 36 rear |
3x112 Pattern Context
This bolt pattern appears on 16 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 3x112:
Expert Buying Guide for 2010 smart fortwo
For the 2010 smart fortwo, the 3x112 bolt pattern and 57.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 66.6mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: front 24mm, rear 22mm. Deviating more than ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (ball seat for OEM wheels, cone seat for most aftermarket). Improper lug nuts can lead to wheel loosening. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, smart fortwo appears from 2008 to 2017 (10 model years). Across model years, this model appears with 2 bolt patterns (3x112, 4x100).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 16.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lb after 50 miles of driving.
- ✅ Verify wheel bore diameter; use hub-centric rings if bore >57.1mm.
- ✅ Check offset carefully; front offset is 24mm, rear is 22mm—mixing can cause handling issues.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 smart fortwo — Frequently Asked Questions
What is the bolt pattern for a 2010 smart fortwo?
The 2010 smart fortwo uses a 3x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 24 front, 22 rearmm.
What other years of smart fortwo have the same bolt pattern as the 2010?
The smart fortwo uses the 3x112 pattern from 2008 through 2012. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Can I use spacers on my 2010 smart fortwo?
Yes, but ensure the wheel spacers match the 3x112 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your B 12x1.50 hardware.
Can I put aftermarket wheels on my 2010 smart fortwo?
Absolutely. Just ensure the aftermarket wheels have a 3x112 bolt pattern, an offset near 24 front, 22 rearmm, and a center bore of at least 57.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2010 smart?
The 2010 fortwo uses a 3x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2010 smart fortwo use?
The 2010 smart fortwo uses B 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset