2005 Mitsubishi Lancer Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2005 Mitsubishi Lancer, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2005 Lancer — Year-Specific Fitment Context
The 2005 model year marks the beginning of the Mitsubishi Lancer's 4x114.3 bolt pattern era, which continued through 2006 (2 consecutive years). Wheels from any 2005–2006 Mitsubishi Lancer are cross-compatible with the 2005 model. Note: the 2004 model used a different pattern (4x100), so its wheels are NOT interchangeable with the 2005. Across its full production run (2002–2017), the Lancer has also used: 4x100, 5x114.3.
Mitsubishi Lancer Bolt Pattern by Year
The table below shows how the Lancer's wheel specifications have changed over the years. The 2005 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2002 | 4x100 | 56.1 | 45 |
| 2003 | 4x100 | 56.1 | 45 |
| 2004 | 4x100 | 56.1 | 45 |
| ▸ 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 4x114.3 | 67.1 | 46 |
| 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 46 |
| 2009 | 5x114.3 | 67.1 | 46 |
| 2010 | 5x114.3 | 67.1 | 46 |
| 2011 | 5x114.3 | 67.1 | 46 |
| 2012 | 5x114.3 | 67.1 | 46 |
| 2013 | 5x114.3 | 67.1 | 46 |
| 2014 | 5x114.3 | 67.1 | 46 |
| 2015 | 5x114.3 | 67.1 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 2005 Mitsubishi Lancer
When selecting wheels for your 2005 Mitsubishi Lancer, the critical specifications are: bolt pattern 4x114.3, center bore 67.1mm, offset ~46mm, and lug nuts 12x1.50. The 67.1mm center bore is hub-centric, meaning the wheel centers on the hub. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; staying within 46mm ±5mm is recommended to avoid rubbing or clearance issues. Always use the correct lug nut thread pitch (12x1.50) and seat type (conical/60-degree) to prevent loosening. Never mix lug nut types. For safety, re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Mitsubishi Lancer appears from 2002 to 2017 (16 model years). Across model years, this model appears with 3 bolt patterns (4x100, 4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 1.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 67.1mm; outer diameter must match wheel bore.
- ✅ Avoid wheels from 2004 or earlier Lancers (4x100 bolt pattern) as they are not compatible.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2005 Mitsubishi Lancer — Frequently Asked Questions
What is the bolt pattern for a 2005 Mitsubishi Lancer?
The 2005 Mitsubishi Lancer uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Mitsubishi Lancer have the same bolt pattern as the 2005?
The Mitsubishi Lancer uses the 4x114.3 pattern from 2005 through 2006. Wheels from any of these model years are dimensionally compatible with the 2005, provided the offset and center bore also match.
Can I use 2004 Mitsubishi Lancer wheels on a 2005?
No. The 2004 Lancer used a 4x100 bolt pattern, which differs from the 2005's 4x114.3. They are not interchangeable.
Can I use spacers on my 2005 Mitsubishi Lancer?
Yes, but ensure the wheel spacers match the 4x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the PCD for a 2005 Mitsubishi Lancer?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2005 Lancer, the PCD is 4x114.3.
Will wheels from another Mitsubishi fit my 2005 Lancer?
Only if they share the exact same 4x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset