2000 Volvo V40 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Volvo V40, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2000 V40 — Year-Specific Fitment Context
The 2000 model year marks the beginning of the Volvo V40's 4x114.3 bolt pattern era, which continued through 2004 (5 consecutive years). Wheels from any 2000–2004 Volvo V40 are cross-compatible with the 2000 model.
Volvo V40 Bolt Pattern by Year
The table below shows how the V40's wheel specifications have changed over the years. The 2000 model year is highlighted.
Fitment Notes
The 2000 Volvo V40 has a bolt pattern of 4x114.3.
This means it is a 4 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Volvo V40 appears from 2000 to 2004 (5 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
2000 Volvo V40 — Frequently Asked Questions
What is the bolt pattern for a 2000 Volvo V40?
The 2000 Volvo V40 uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 44mm.
What other years of Volvo V40 have the same bolt pattern as the 2000?
The Volvo V40 uses the 4x114.3 pattern from 2000 through 2004. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
What is the factory wheel offset for a 2000 Volvo V40?
The OEM offset for the 2000 V40 is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Volvo fit my 2000 V40?
Only if they share the exact same 4x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the PCD for a 2000 Volvo V40?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 V40, the PCD is 4x114.3.
Can I put aftermarket wheels on my 2000 Volvo V40?
Absolutely. Just ensure the aftermarket wheels have a 4x114.3 bolt pattern, an offset near 44mm, and a center bore of at least 67.1mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Volvo V40 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2000-2004 (5 model years).
- Observed bolt-pattern variants: 1 (4x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2000 Volvo V40, please report it via our About page contact so we can verify and update this record.